Comparison Toyota Verso (facelift 2013) 1.6 Valvematic (132 Hp) 7 Seat & Skoda Kamiq 1.0 G-TEC (90 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Skoda |
| Model: | Verso | Kamiq |
| Generation: | Verso (facelift 2013) | Kamiq |
| Engine / modification: | 1.6 Valvematic (132 Hp) 7 Seat | 1.0 G-TEC (90 Hp) |
| Production start: | 2013 year | 2019 year |
| Production end: | 2018 year | |
| Coupe type: | MPV | SUV |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 7 | 5 |
| Fuel consumption / economy - urban: | 8.3 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.6 l/100 km | |
| Fuel consumption / economy - combined: | 6.6 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol / CNG |
| Fuel tank volume: | 60 l | |
| Emission standard: | Euro 5 | Euro 6d - TEMP |
| CO2 emissions: | 154 g/km | |
| Power: | 132 hp | 90 hp |
| Maximum speed: | 185 km/h | |
| Acceleration from 0 to 100 km/h: | 11.7 sec | |
| Torque: | 160 Nm @ 4400 rpm. | 160 Nm |
| Model Engine: | DBYA | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1598 cm3 | |
| Engine oil capacity: | 4 l | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 3 |
| Number of valves per cylinder: | 4 | 4 |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 6 | 6 |
| Length: | 4460 mm | 4241 mm |
| Width: | 1790 mm | 1793 mm |
| Width including mirrors: | 1988 mm | |
| Height: | 1620 mm | 1553 mm |
| Wheelbase: | 2780 mm | 2651 mm |
| Front track: | 1531 mm | |
| Rear (Back) track: | 1516 mm | |
| Approach angle: | 17.4 ° | |
| Departure angle: | 20 ° | |
| Front overhang: | 837 mm | |
| Rear overhang: | 753 mm | |
| Minimum volume of Luggage (trunk): | 178 l | |
| Maximum amount of Luggage (trunk): | 1696 l | |
| Max weight: | 2125 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Drum | Disc |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Electric Steering | |
| Minimum turning circle (turning diameter): | 11.6 m |