Comparison Toyota Venza 2.7 (182 Hp) AWD & Chevrolet Camaro V (facelift 2013) 3.6 V6 (323 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Chevrolet |
| Model: | Venza | Camaro |
| Generation: | Venza | Camaro V (facelift 2013) |
| Engine / modification: | 2.7 (182 Hp) AWD | 3.6 V6 (323 Hp) |
| Production start: | 2008 year | 2013 year |
| Production end: | 2016 year | |
| Coupe type: | Off-road vehicle | Coupe |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 5 | 4 |
| Fuel consumption / economy - urban: | 13.8 l/100 km | |
| Fuel consumption / economy - extra urban: | 8.7 l/100 km | |
| Fuel consumption / economy - combined: | 11.8 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 67 l | 71.9 l |
| CO2 emissions: | 275 g/km | |
| Power: | 182 hp | 323 hp |
| Max power in: | 4800 rpm. | 6800 rpm. |
| Torque: | 240 Nm/4000 rpm. | 377 Nm @ 4800 rpm. |
| Model Engine: | LFX | |
| Engine position: | Front, longitudinal | Front, longitudinal |
| Engine displacement: | 2694 cm3 | 3564 cm3 |
| Engine oil capacity: | 7.2 l | |
| Coolant: | 10.6 l | |
| Fuel System: | Multi-point injection | Direct injection |
| Maximum engine speed: | 7200 rpm. | |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | DOHC | DOHC, VVT |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 9.5 | 11.5 |
| Piston Stroke: | 95 mm | 85.6 mm |
| Cylinder Bore: | 95 mm | 94 mm |
| Wheel Drive: | All wheel drive (4x4) | Rear wheel drive |
| Number of Gears (automatic transmission): | 6 | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4801 mm | 4841 mm |
| Width: | 1905 mm | 1918 mm |
| Height: | 1610 mm | 1376 mm |
| Wheelbase: | 2776 mm | 2852 mm |
| Front track: | 1631 mm | 1618 mm |
| Rear (Back) track: | 1636 mm | 1628 mm |
| Minimum volume of Luggage (trunk): | 320 l | |
| Front suspension: | McPherson | |
| Rear suspension: | Independent, spring | |
| Kerb Weight: | 1696 kg | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 11.5 m | |
| Tire size: | 245/55 R18; 245/50 R19 | |
| Wheel rims size: | 7.5J x 18; 8J x 19 |