Comparison Toyota Sprinter Trueno 1.6 i (165 Hp) & Citroen C5 I Break (Phase I, 2000) 3.0i V6 24V Carlsson (235 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Citroen |
| Model: | Sprinter | C5 |
| Generation: | Sprinter Trueno | C5 I Break (Phase I, 2000) |
| Engine / modification: | 1.6 i (165 Hp) | 3.0i V6 24V Carlsson (235 Hp) |
| Production start: | 1995 year | 2003 year |
| Production end: | 2002 year | 2004 year |
| Coupe type: | Coupe | Combi |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | 66 l |
| Power: | 165 hp | 235 hp |
| Max power in: | 7800 rpm. | 6000 rpm. |
| Maximum speed: | 245 km/h | |
| Acceleration from 0 to 100 km/h: | 8.5 sec | |
| Torque: | 162 Nm @ 5600 rpm. | 320 Nm/3750 rpm. |
| Model Engine: | 4A-GE | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1578 cm3 | 2946 cm3 |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | DOHC | - |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 10.9 | |
| Piston Stroke: | 82.6 mm | |
| Cylinder Bore: | 87 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Length: | 4300 mm | 4760 mm |
| Width: | 1695 mm | 1770 mm |
| Width including mirrors: | 2100 mm | |
| Height: | 1305 mm | 1520-1560 mm |
| Wheelbase: | 2465 mm | 2750 mm |
| Front track: | 1470 mm | 1540 mm |
| Rear (Back) track: | 1460 mm | 1510 mm |
| Front overhang: | 970 mm | |
| Rear overhang: | 1040 mm | |
| Minimum volume of Luggage (trunk): | 563 l | |
| Maximum amount of Luggage (trunk): | 1658 l | |
| Front suspension: | Independent type McPherson | |
| Rear suspension: | Semi-independent, spring | |
| Max weight: | 2179 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Disc |
| Kerb Weight: | 1030 kg | 1619 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 12.46 m | |
| Tire size: | 225/40 R18 | |
| Wheel rims size: | R18 |