Comparison Toyota Platz 1.0i 16V (70 Hp) Automatic & Toyota Passo 1.0i (70 Hp) & Toyota Mark X Zio 2.4 (165 Hp)
Add car |
Remove car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota | Toyota |
| Model: | Platz | Passo | Mark X |
| Generation: | Platz | Passo | Mark X Zio |
| Engine / modification: | 1.0i 16V (70 Hp) Automatic | 1.0i (70 Hp) | 2.4 (165 Hp) |
| Production start: | 1999 year | 2004 year | 2007 year |
| Production end: | 2005 year | 2013 year | |
| Coupe type: | Sedan | Hatchback | |
| Num. of Doors: | 4 | 5 | |
| Num. of seats: | 5 | 5 | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 45 l | 40 l | |
| Emission standard: | EURO IV | ||
| Power: | 70 hp | 70 hp | 165 hp |
| Max power in: | 6000 rpm. | 6000 rpm. | |
| Maximum speed: | 150 km/h | ||
| Torque: | 95 Nm @ 4000 rpm. | 95 Nm/4000 rpm. | |
| Engine position: | Front, transverse | Front, transverse | |
| Engine displacement: | 997 cm3 | 997 cm3 | |
| Fuel System: | Multi-point injection | Multi-point injection | |
| Position of cylinders: | Inline | Inline | |
| Valvetrain: | DOHC | DOHC | |
| Number of cylinders: | 4 | 4 | |
| Number of valves per cylinder: | 4 | 4 | |
| Compression ratio: | 10 | 10 | |
| Piston Stroke: | 66.7 mm | 66.7 mm | |
| Cylinder Bore: | 69 mm | 69 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive | |
| Number of Gears (automatic transmission): | 4 | 4 | |
| Number of Gears (manual transmission): | 5 | ||
| Length: | 4145 mm | 3595 mm | |
| Width: | 1660 mm | 1665 mm | |
| Height: | 1500 mm | 1535 mm | |
| Wheelbase: | 2370 mm | 2440 mm | |
| Front track: | 1450 mm | 1465 mm | |
| Rear (Back) track: | 1430 mm | 1475 mm | |
| Minimum volume of Luggage (trunk): | 435 l | ||
| Front suspension: | Wishbone | ||
| Rear suspension: | Helical spring | ||
| Max weight: | 1135 kg | ||
| Front brakes: | Ventilated discs | Ventilated discs | |
| Rear brakes: | Disc | Drum | |
| Kerb Weight: | 860 kg | 930 kg | |
| ABS: | yes | yes | |
| Steering type: | Steering rack and pinion | ||
| Power steering: | Hydraulic Steering | ||
| Minimum turning circle (turning diameter): | 8.6 m | ||
| Tire size: | 155/80 R13 | ||
| Wheel rims size: | R13 |