Comparison Toyota Passo 1.3i (88 Hp) Automatic & Fiat Siena (178) 1.7 TD (69 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Fiat |
| Model: | Passo | Siena |
| Generation: | Passo | Siena (178) |
| Engine / modification: | 1.3i (88 Hp) Automatic | 1.7 TD (69 Hp) |
| Production start: | 2004 year | 1996 year |
| Production end: | 2010 year | |
| Coupe type: | Hatchback | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 40 l | 48 l |
| Emission standard: | Euro 4 | |
| Power: | 88 hp | 69 hp |
| Max power in: | 6000 rpm. | 4500 rpm. |
| Maximum speed: | 164 km/h | |
| Acceleration from 0 to 100 km/h: | 14.8 sec | |
| Torque: | 123 Nm @ 4400 rpm. | 134 Nm/2500 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1299 cm3 | 1698 cm3 |
| Fuel System: | Multi-point injection | Diesel - Standard diesel injection (SDI) |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 10.5 | 20.3 |
| Piston Stroke: | 73.5 mm | 79.2 mm |
| Cylinder Bore: | 75 mm | 82.6 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | - |
| Number of Gears (manual transmission): | 5 | |
| Length: | 3595 mm | 4100 mm |
| Width: | 1665 mm | 1614 mm |
| Height: | 1535 mm | 1445 mm |
| Wheelbase: | 2440 mm | 2360 mm |
| Front track: | 1465 mm | 1388 mm |
| Rear (Back) track: | 1475 mm | 1378 mm |
| Minimum volume of Luggage (trunk): | 500 l | |
| Maximum amount of Luggage (trunk): | 850 l | |
| Front suspension: | Helical spring | |
| Rear suspension: | Helical spring | |
| Max weight: | 1560 kg | |
| Front brakes: | Ventilated discs | Disc |
| Rear brakes: | Drum | Drum |
| Kerb Weight: | 930 kg | 1070 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 8.6 m | |
| Tire size: | 175/65 R14 |