Comparison Toyota Land Cruiser Prado (J150 facelift 2013) 2.7 VVT-i (163 Hp) Automatic & Toyota Hilux Surf 4.0 V6 24V (239 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota |
| Model: | Land Cruiser | Hilux |
| Generation: | Land Cruiser Prado (J150 facelift 2013) | Hilux Surf |
| Engine / modification: | 2.7 VVT-i (163 Hp) Automatic | 4.0 V6 24V (239 Hp) |
| Production start: | 2013 year | 1996 year |
| Production end: | 2002 year | |
| Coupe type: | Off-road vehicle | Off-road vehicle |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 12.5 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 87 l | |
| Emission standard: | EURO IV | |
| Power: | 163 hp | 239 hp |
| Max power in: | 5200 rpm. | 5200 rpm. |
| Maximum speed: | 165 km/h | |
| Acceleration from 0 to 100 km/h: | 10.9 sec | |
| Torque: | 246 Nm/3800-3800 rpm. | 382 Nm/3200 rpm. |
| Model Engine: | 2TR-FE | |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 2694 cm3 | 3956 cm3 |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | DOHC - VVT-i | - |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 9.6 | 10 |
| Piston Stroke: | 95 mm | 95 mm |
| Cylinder Bore: | 95 mm | 94 mm |
| Wheel Drive: | All wheel drive (4x4) | |
| Number of Gears (automatic transmission): | 4 | |
| Length: | 4780 mm | 4770 mm |
| Width: | 1885 mm | 1875 mm |
| Height: | 1845 mm | 1790 mm |
| Wheelbase: | 2790 mm | 2790 mm |
| Front track: | 1585 mm | 1575 mm |
| Rear (Back) track: | 1585 mm | 1575 mm |
| Minimum volume of Luggage (trunk): | 621 l | |
| Front suspension: | Double wishbone | |
| Rear suspension: | Dependent, multi-link spring with telescopic shock absorbers | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Ventilated discs | |
| Kerb Weight: | 2850 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.6 m |