Comparison Toyota Land Cruiser 105 4.2 D (135 Hp) Automatic & Vauxhall Firenza Coupe 2300 (132 Hp) & Volkswagen Golf II (19E) 1.8 GTI (112 Hp)
Add car |
Remove car |
Remove car |
Remove car |
| Brand: | Toyota | Vauxhall | Volkswagen |
| Model: | Land Cruiser | Firenza Coupe | Golf |
| Generation: | Land Cruiser 105 | Firenza Coupe | Golf II (19E) |
| Engine / modification: | 4.2 D (135 Hp) Automatic | 2300 (132 Hp) | 1.8 GTI (112 Hp) |
| Production start: | 1998 year | 1974 year | 1983 year |
| Production end: | 2005 year | 1975 year | 1989 year |
| Coupe type: | Off-road vehicle | Coupe | Hatchback |
| Num. of Doors: | 5 | 2 | 5 |
| Num. of seats: | 8 | 5 | 5 |
| Fuel Type: | Diesel | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 95 l | 45 l | |
| Emission standard: | Euro 3 | ||
| Power: | 135 hp | 132 hp | 112 hp |
| Max power in: | 4000 rpm. | ||
| Maximum speed: | 200 km/h | ||
| Torque: | 280 Nm @ 2200 rpm. | ||
| Model Engine: | EV, PB | ||
| Engine position: | Front, longitudinal | Front, transverse | |
| Engine displacement: | 4163 cm3 | 1781 cm3 | |
| Engine oil capacity: | 3-4 l | ||
| Coolant: | 6.5 l | ||
| Fuel System: | Diesel Commonrail | Direct injection | |
| Aspiration / Turbine: | Turbocharger | ||
| Position of cylinders: | Inline | Inline | |
| Valvetrain: | - | ||
| Number of cylinders: | 6 | 4 | |
| Number of valves per cylinder: | 2 | 2 | |
| Compression ratio: | 22.7 | 10 | |
| Piston Stroke: | 100 mm | ||
| Cylinder Bore: | 94 mm | ||
| Wheel Drive: | All wheel drive (4x4) | Front wheel drive | |
| Number of Gears (automatic transmission): | 5 | 4 | |
| Number of Gears (manual transmission): | 5 | ||
| Length: | 4890 mm | ||
| Width: | 1940 mm | ||
| Height: | 1890 mm | ||
| Wheelbase: | 2850 mm | ||
| Front track: | 1620 mm | ||
| Rear (Back) track: | 1615 mm | ||
| Front suspension: | McPherson | ||
| Front brakes: | Ventilated discs | Ventilated discs | |
| Rear brakes: | Ventilated discs | Disc | |
| ABS: | yes | yes | |
| Power steering: | Hydraulic Steering | ||
| Minimum turning circle (turning diameter): | 11 m | ||
| Wheel rims size: | R15 |