Comparison Toyota Kluger I 3.0 V6 24V (220 Hp) & Ford Scorpio I (GAE,GGE) 2.8 i 4x4 (150 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Ford |
| Model: | Kluger | Scorpio |
| Generation: | Kluger I | Scorpio I (GAE,GGE) |
| Engine / modification: | 3.0 V6 24V (220 Hp) | 2.8 i 4x4 (150 Hp) |
| Production start: | 2000 year | 1985 year |
| Production end: | 2007 year | 1986 year |
| Coupe type: | Off-road vehicle | Sedan |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 72 l | 70 l |
| Power: | 220 hp | 150 hp |
| Max power in: | 5800 rpm. | 5700 rpm. |
| Torque: | 301 Nm @ 4400 rpm. | 216 Nm/3800 rpm. |
| Model Engine: | 1MZ-FE | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 2995 cm3 | 2792 cm3 |
| Engine oil capacity: | 4.7 l | |
| Coolant: | 9.0 l | |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | V engine | V engine |
| Valvetrain: | DOHC | OHC |
| Number of cylinders: | 6 | 6 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 10.5 | |
| Piston Stroke: | 83 mm | 68.5 mm |
| Cylinder Bore: | 87.5 mm | 93 mm |
| Wheel Drive: | All wheel drive (4x4) | All wheel drive (4x4) |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4685 mm | 4744 mm |
| Width: | 1825 mm | 1766 mm |
| Height: | 1720 mm | 1450 mm |
| Wheelbase: | 2715 mm | 2761 mm |
| Front track: | 1575 mm | |
| Rear (Back) track: | 1555 mm | |
| Front suspension: | Wishbone | |
| Rear suspension: | Helical spring | |
| Max weight: | 1905 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Disc |
| Kerb Weight: | 1630 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Hydraulic Steering | Hydraulic Steering |
| Minimum turning circle (turning diameter): | 10.4 m | |
| Tire size: | 215/70 R16 S |