Comparison Toyota Crown Wagon (S11) 3.0 i 24V 4WD Estate (220 Hp) & Toyota Celsior III 4.3 V8 i (280 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota |
| Model: | Crown | Celsior |
| Generation: | Crown Wagon (S11) | Celsior III |
| Engine / modification: | 3.0 i 24V 4WD Estate (220 Hp) | 4.3 V8 i (280 Hp) |
| Production start: | 2000 year | 2000 year |
| Production end: | 2004 year | |
| Coupe type: | Combi | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 73 l | 84 l |
| Power: | 220 hp | 280 hp |
| Max power in: | 5600 rpm. | 5600 rpm. |
| Torque: | 296 Nm/3600 rpm. | 430 Nm @ 3400 rpm. |
| Model Engine: | 3UZ-FE | |
| Engine position: | Front, longitudinal | Front, longitudinal |
| Engine displacement: | 2997 cm3 | 4292 cm3 |
| Engine oil capacity: | 5.1 l | |
| Fuel System: | Direct injection | Multi-point injection |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | DOHC | DOHC |
| Number of cylinders: | 6 | 8 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 11.3 | 10.5 |
| Piston Stroke: | 86 mm | 82.5 mm |
| Cylinder Bore: | 86 mm | 91 mm |
| Wheel Drive: | All wheel drive (4x4) | Rear wheel drive |
| Number of Gears (automatic transmission): | 5 | 6 |
| Length: | 4820 mm | 4995 mm |
| Width: | 1710 mm | 1830 mm |
| Height: | 1470 mm | 1490 mm |
| Wheelbase: | 2800 mm | 2925 mm |
| Front track: | 1455 mm | |
| Rear (Back) track: | 1400 mm | |
| Front suspension: | Helical spring | Coil spring |
| Rear suspension: | Helical spring | Helical spring |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Ventilated discs |
| Kerb Weight: | 1660 kg | 1780 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | Hydraulic Steering |
| Minimum turning circle (turning diameter): | 10.4 m | |
| Tire size: | 215/65 R15 | 225/60 R16 98H |
| Wheel rims size: | 7JJ x 16 |