Comparison Toyota Crown Royal XI (S170, facelift 2001) 3.0 Four 24V (220 Hp) 4WD Automatic & Peugeot 308 I (Phase II, 2011) 1.6 GTi THP (200 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Peugeot |
| Model: | Crown | 308 |
| Generation: | Crown Royal XI (S170, facelift 2001) | 308 I (Phase II, 2011) |
| Engine / modification: | 3.0 Four 24V (220 Hp) 4WD Automatic | 1.6 GTi THP (200 Hp) |
| Production start: | 2001 year | 2011 year |
| Production end: | 2003 year | 2013 year |
| Coupe type: | Sedan | Hatchback |
| Num. of Doors: | 4 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.28 | |
| Fuel tank volume: | 70 l | 60 l |
| Emission standard: | Euro 5 | |
| Power: | 220 hp | 200 hp |
| Max power in: | 5800 rpm. | 5800 rpm. |
| Maximum speed: | 237 km/h | |
| Acceleration from 0 to 100 km/h: | 7.7 sec | |
| Torque: | 294 Nm @ 3800 rpm. | 275 Nm @ 1700 rpm. |
| Model Engine: | 2JZ-FSE | EP6CDTX |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 2997 cm3 | 1598 cm3 |
| Engine oil capacity: | 5.4 l | 4.25 l |
| Coolant: | 7.5 l | |
| Fuel System: | Direct injection | Direct injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | DOHC |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 11.3 | 10.5 |
| Piston Stroke: | 86 mm | 85.8 mm |
| Cylinder Bore: | 86 mm | 77 mm |
| Wheel Drive: | All wheel drive (4x4) | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | 6 |
| Length: | 4820 mm | 4276 mm |
| Width: | 1765 mm | 1815 mm |
| Width including mirrors: | 2038 mm | |
| Height: | 1470 mm | 1498 mm |
| Wheelbase: | 2780 mm | 2608 mm |
| Front track: | 1490 mm | 1526 mm |
| Rear (Back) track: | 1470 mm | 1521 mm |
| Ride height(clearance): | 150 mm | |
| Front overhang: | 926 mm | |
| Rear overhang: | 742 mm | |
| Minimum volume of Luggage (trunk): | 348 l | |
| Maximum amount of Luggage (trunk): | 1201 l | |
| Front suspension: | Double wishbone | McPherson |
| Rear suspension: | Double wishbone | Elastic beam |
| Max weight: | 1850 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Disc |
| Kerb Weight: | 1620 kg | 1399 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Hydraulic Steering | |
| Max. roof load: | 75 kg | |
| Minimum turning circle (turning diameter): | 11.2 m | 10.7 m |
| Tire size: | 205/65 R15 | 225/40 R18 |
| Wheel rims size: | R15 | 8J x 18 |