Comparison Toyota Crown 2.4 DT (97 Hp) & Toyota Camry II (V20) 1.8 (90 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota |
| Model: | Crown | Camry |
| Generation: | Crown | Camry II (V20) |
| Engine / modification: | 2.4 DT (97 Hp) | 1.8 (90 Hp) |
| Production start: | 1988 year | 1988 year |
| Production end: | 1999 year | 1991 year |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 4 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 8 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Drag coefficient: | 0.35 | |
| Fuel tank volume: | 72 l | 60 l |
| Power: | 97 hp | 90 hp |
| Max power in: | 3800 rpm. | 5200 rpm. |
| Maximum speed: | 170 km/h | |
| Acceleration from 0 to 100 km/h: | 12 sec | |
| Torque: | 221 Nm/2400 rpm. | 141 Nm @ 3400 rpm. |
| Model Engine: | 1S-i | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 2446 cm3 | 1832 cm3 |
| Engine oil capacity: | 4 l | |
| Coolant: | 7 l | |
| Fuel System: | Diesel - Standard diesel injection (SDI) | Carburettor |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHC | SOHC |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 9.1 | |
| Piston Stroke: | 89.9 mm | |
| Cylinder Bore: | 80.5 mm | |
| Wheel Drive: | Rear wheel drive | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4810 mm | 4520 mm |
| Width: | 1760 mm | 1710 mm |
| Height: | 1440 mm | 1400 mm |
| Wheelbase: | 2730 mm | 2600 mm |
| Front track: | 1475 mm | |
| Rear (Back) track: | 1445 mm | |
| Maximum amount of Luggage (trunk): | 505 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Torsion | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 1480 kg | 1124 kg |
| Minimum turning circle (turning diameter): | 10.6 m | |
| Tire size: | 195 / 65R15 | 175/70 R14 |
| Wheel rims size: | 15x6.5JJ | R14 |