Comparison Toyota Corona (RX,RT) 2.0 (RT104) (88 Hp) & Jeep Liberty I (facelift 2005) 2.4 16V (150 Hp) 4WD
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Jeep |
| Model: | Corona | Liberty |
| Generation: | Corona (RX,RT) | Liberty I (facelift 2005) |
| Engine / modification: | 2.0 (RT104) (88 Hp) | 2.4 16V (150 Hp) 4WD |
| Production start: | 1976 year | 2005 year |
| Production end: | 1979 year | 2006 year |
| Coupe type: | SUV | |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 5 | |
| Num. of seats: | 5 | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 78 l | |
| Power: | 88 hp | 150 hp |
| Max power in: | 5600 rpm. | |
| Torque: | 224 Nm @ 4000 rpm. | |
| Model Engine: | ED1 | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 2429 cm3 | |
| Engine oil capacity: | 4.7 l | |
| Coolant: | 9.5 l | |
| Fuel System: | Multi-point indirect injection | |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9.4 | |
| Piston Stroke: | 101 mm | |
| Cylinder Bore: | 87.5 mm | |
| Wheel Drive: | All wheel drive (4x4) | |
| Length: | 4437 mm | |
| Width: | 1824 mm | |
| Height: | 1824 mm | |
| Wheelbase: | 2647 mm | |
| Front track: | 1524 mm | |
| Rear (Back) track: | 1516 mm | |
| Ride height(clearance): | 239 mm | |
| Approach angle: | 37.2 ° | |
| Departure angle: | 31.5 ° | |
| Front overhang: | 734 mm | |
| Rear overhang: | 1052 mm | |
| Minimum volume of Luggage (trunk): | 878 l | |
| Maximum amount of Luggage (trunk): | 1954 l | |
| Max weight: | 2359 kg | |
| Kerb Weight: | 1747 kg | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.9 m | |
| Permitted trailer load with brakes (12%): | 1588 kg | |
| Tire size: | 225/75 R16; 235/65 R17 | |
| Wheel rims size: | 7J x 16; 7.5J x 17 |