Comparison Toyota Corolla Verso III (facelift 2007) 2.0 D-4D (126 Hp) & Mazda 323 III Hatchback (BF) 1.6 GT Turbo (BF1) (140 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Mazda |
| Model: | Corolla Verso | 323 |
| Generation: | Corolla Verso III (facelift 2007) | 323 III Hatchback (BF) |
| Engine / modification: | 2.0 D-4D (126 Hp) | 1.6 GT Turbo (BF1) (140 Hp) |
| Production start: | 2007 year | 1985 year |
| Production end: | 2009 year | 1991 year |
| Coupe type: | MPV | Hatchback |
| Num. of Doors: | 5 | |
| Num. of seats: | 7 | |
| Fuel consumption / economy - urban: | 7.0 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.5 l/100 km | |
| Fuel consumption / economy - combined: | 5.4 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 55 l | |
| Emission standard: | Euro 4 | |
| Power: | 126 hp | 140 hp |
| Max power in: | 3600 rpm. | |
| Maximum speed: | 185 km/h | |
| Acceleration from 0 to 100 km/h: | 11.3 sec | |
| Torque: | 310 Nm @ 1800-2400 rpm. | |
| Model Engine: | 1CD-FTV | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1998 cm3 | |
| Engine oil capacity: | 5.9 l | |
| Coolant: | 7.4 l | |
| Fuel System: | Diesel - Standard diesel injection (SDI) | |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 15.8 | |
| Piston Stroke: | 86 mm | |
| Cylinder Bore: | 86 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4440 mm | |
| Width: | 1790 mm | |
| Height: | 1630 mm | |
| Front track: | 1535 mm | |
| Rear (Back) track: | 1545 mm | |
| Front suspension: | Independent type McPherson | |
| Rear suspension: | Torsion | |
| Max weight: | 2260 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1540 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.2 m |