Comparison Toyota Corolla II Van (E20) 1200 (68 Hp) & Toyota Belta 1.5 (106 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota |
| Model: | Corolla | Belta |
| Generation: | Corolla II Van (E20) | Belta |
| Engine / modification: | 1200 (68 Hp) | 1.5 (106 Hp) Automatic |
| Production start: | 1970 year | 2005 year |
| Production end: | 1974 year | 2012 year |
| Coupe type: | Sedan | |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 3 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 5 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 40 l | 42 l |
| Power: | 68 hp | 106 hp |
| Max power in: | 6000 rpm. | 6000 rpm. |
| Maximum speed: | 135 km/h | |
| Torque: | 93 Nm @ 3800 rpm. | 145 Nm @ 4200 rpm. |
| Model Engine: | 3K | 1NZ-FE |
| Engine position: | Front, transverse | |
| Engine displacement: | 1166 cm3 | 1497 cm3 |
| Engine oil capacity: | 3.4 l | |
| Fuel System: | Multi-point injection | |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | Inline | |
| Valvetrain: | OHV | DOHC |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 9 | 10.5 |
| Piston Stroke: | 66 mm | 84.7 mm |
| Cylinder Bore: | 75 mm | 75 mm |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Length: | 3980 mm | 4300 mm |
| Width: | 1505 mm | 1895 mm |
| Height: | 1405 mm | 1460 mm |
| Wheelbase: | 2335 mm | 2550 mm |
| Front track: | 1255 mm | |
| Rear (Back) track: | 1245 mm | |
| Ride height(clearance): | 180 mm | |
| Front brakes: | Disc | |
| Rear brakes: | Drum | |
| Kerb Weight: | 765 kg | |
| Steering type: | Cone worm with recirculation balls | |
| Minimum turning circle (turning diameter): | 9 m |