Comparison Toyota Corolla II Coupe (E20) 1200 (68 Hp) & Rolls-Royce Phantom Extended Wheelbase 6.75 i V12 48V (460 Hp) ED
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Rolls-Royce |
| Model: | Corolla | Phantom |
| Generation: | Corolla II Coupe (E20) | Phantom Extended Wheelbase |
| Engine / modification: | 1200 (68 Hp) | 6.75 i V12 48V (460 Hp) ED |
| Production start: | 1970 year | 2003 year |
| Production end: | 1974 year | |
| Coupe type: | Coupe | Sedan |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 2 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 24.6 l/100 km | |
| Fuel consumption / economy - extra urban: | 11.7 l/100 km | |
| Fuel consumption / economy - combined: | 4.7 l/100 km | 15.9 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 45 l | 100 l |
| Power: | 68 hp | 460 hp |
| Max power in: | 6000 rpm. | 5350 rpm. |
| Maximum speed: | 150 km/h | 240 km/h |
| Acceleration from 0 to 100 km/h: | 5.9 sec | |
| Torque: | 93 Nm @ 3800 rpm. | 720 Nm/3500 rpm. |
| Model Engine: | 3K | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 1166 cm3 | 6749 cm3 |
| Fuel System: | Multi-point injection | |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | V engine | |
| Valvetrain: | OHV | DOHC |
| Number of cylinders: | 4 | 12 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 9 | 11 |
| Piston Stroke: | 66 mm | 84.6 mm |
| Cylinder Bore: | 75 mm | 92 mm |
| Wheel Drive: | Rear wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | 6 | |
| Length: | 3945 mm | 6084 mm |
| Width: | 1505 mm | 1990 mm |
| Height: | 1345 mm | 1632 mm |
| Wheelbase: | 2335 mm | 3820 mm |
| Front track: | 1255 mm | 1685 mm |
| Rear (Back) track: | 1245 mm | 1670 mm |
| Minimum volume of Luggage (trunk): | 460 l | |
| Max weight: | 3170 kg | |
| Front brakes: | Disc | Ventilated discs |
| Rear brakes: | Drum | Ventilated discs |
| Kerb Weight: | 745 kg | 2670 kg |
| ABS: | yes | |
| Steering type: | Cone worm with recirculation balls | Steering rack and pinion |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 9 m |