Comparison Toyota Corolla II Coupe (E20) 1200 (68 Hp) Automatic & Toyota Corolla V (E80) 1.8 D (64 Hp) & Toyota Corolla II 2-door sedan (E20) 1200 (68 Hp) Automatic
Add car |
Remove car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota | Toyota |
| Model: | Corolla | Corolla | Corolla |
| Generation: | Corolla II Coupe (E20) | Corolla V (E80) | Corolla II 2-door sedan (E20) |
| Engine / modification: | 1200 (68 Hp) Automatic | 1.8 D (64 Hp) | 1200 (68 Hp) Automatic |
| Production start: | 1970 year | 1985 year | 1970 year |
| Production end: | 1974 year | 1988 year | 1974 year |
| Coupe type: | Coupe | Sedan | Sedan |
| Powertrain Architecture: | Internal Combustion engine | Internal Combustion engine | |
| Num. of Doors: | 2 | 4 | 2 |
| Num. of seats: | 5 | 5 | 5 |
| Fuel consumption / economy - combined: | 5.2 l/100 km | 5.2 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 45 l | 45 l | |
| Power: | 68 hp | 64 hp | 68 hp |
| Max power in: | 6000 rpm. | 6000 rpm. | |
| Maximum speed: | 140 km/h | 140 km/h | |
| Torque: | 93 Nm @ 3800 rpm. | 93 Nm @ 3800 rpm. | |
| Model Engine: | 3K | 1C-L | 3K |
| Engine displacement: | 1166 cm3 | 1166 cm3 | |
| Engine oil capacity: | 4.3 l | ||
| Coolant: | 7 l | ||
| Aspiration / Turbine: | Naturally aspirated engine | Naturally aspirated engine | |
| Valvetrain: | OHV | OHV | |
| Number of cylinders: | 4 | 4 | |
| Number of valves per cylinder: | 2 | 2 | |
| Compression ratio: | 9 | 9 | |
| Piston Stroke: | 66 mm | 66 mm | |
| Cylinder Bore: | 75 mm | 75 mm | |
| Wheel Drive: | Rear wheel drive | Rear wheel drive | |
| Length: | 3945 mm | 3945 mm | |
| Width: | 1505 mm | 1505 mm | |
| Height: | 1345 mm | 1375 mm | |
| Wheelbase: | 2335 mm | 2335 mm | |
| Front track: | 1255 mm | 1255 mm | |
| Rear (Back) track: | 1245 mm | 1245 mm | |
| Front brakes: | Disc | Disc | |
| Rear brakes: | Drum | Drum | |
| Kerb Weight: | 760 kg | 745 kg | |
| Steering type: | Cone worm with recirculation balls | Cone worm with recirculation balls | |
| Minimum turning circle (turning diameter): | 9 m | 9 m |