Car technical specifications and fuel economy / consumption / mpg

Comparison Toyota Corolla II 4-door sedan (E20) SL 1200 (77 Hp) & Seat Leon III ST 2.0 TDI (150 Hp) start/stop 4Drive


Add car
Toyota Corolla II 4-door sedan (E20) SL 1200 (77 Hp)
Remove car
Seat Leon III ST 2.0 TDI (150 Hp) start/stop 4Drive
Remove car
Brand: Toyota Seat
Model: Corolla Leon
Generation: Corolla II 4-door sedan (E20) Leon III ST
Engine / modification: SL 1200 (77 Hp) 2.0 TDI (150 Hp) start/stop 4Drive
Production start: 1970 year 2014 year
Production end: 1974 year 2015 year
Coupe type: Sedan Combi
Powertrain Architecture: Internal Combustion engine
Num. of Doors: 4 5
Num. of seats: 5 5
Fuel consumption / economy - urban: 5.8 l/100 km
Fuel consumption / economy - extra urban: 4.2 l/100 km
Fuel consumption / economy - combined: 5 l/100 km 4.8 l/100 km
Fuel Type: Petrol (Gasoline) Diesel
Fuel tank volume: 45 l
Emission standard: Euro 5
CO2 emissions: 124 g/km
Power: 77 hp 150 hp
Max power in: 6600 rpm. 3500-4000 rpm.
Maximum speed: 160 km/h 211 km/h
Acceleration from 0 to 100 km/h: 8.7 sec
Torque: 94 Nm @ 4600 rpm. 320 Nm @ 1750-3000 rpm.
Model Engine: 3K-B CRBC, CKFC, CRLB, CRMB
Engine position: Front, transverse
Engine displacement: 1166 cm3 1968 cm3
Engine oil capacity: 4.6-4.7 l
Fuel System: Diesel Commonrail
Aspiration / Turbine: Naturally aspirated engine Turbo / Intercooler (Turbocharging / Intercooler)
Position of cylinders: Inline
Valvetrain: OHV
Number of cylinders: 4 4
Number of valves per cylinder: 2 4
Compression ratio: 10 16
Piston Stroke: 66 mm 95.5 mm
Cylinder Bore: 75 mm 81 mm
Wheel Drive: Rear wheel drive All wheel drive (4x4)
Number of Gears (manual transmission): 6
Length: 3945 mm 4535 mm
Width: 1505 mm 1816 mm
Height: 1375 mm 1451 mm
Wheelbase: 2335 mm 2636 mm
Front track: 1255 mm 1549 mm
Rear (Back) track: 1245 mm 1520 mm
Minimum volume of Luggage (trunk): 587 l
Maximum amount of Luggage (trunk): 1470 l
Max weight: 2040 kg
Front brakes: Disc
Rear brakes: Drum
Kerb Weight: 785 kg 1474 kg
ABS: yes
Steering type: Cone worm with recirculation balls Steering rack and pinion
Minimum turning circle (turning diameter): 9 m