Comparison Toyota Corolla II 2-door sedan (E20) 1200 (73 Hp) Automatic & Great Wall Cool Bear 1,5 (105 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Great Wall |
| Model: | Corolla | Cool Bear |
| Generation: | Corolla II 2-door sedan (E20) | Cool Bear |
| Engine / modification: | 1200 (73 Hp) Automatic | 1,5 (105 Hp) |
| Production start: | 1970 year | 2009 year |
| Production end: | 1974 year | 2012 year |
| Coupe type: | Sedan | Minivan |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 5.1 l/100 km | 6.7 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 45 l | 45 l |
| Emission standard: | Euro 4 | |
| Power: | 73 hp | 105 hp |
| Max power in: | 6600 rpm. | 6000 rpm. |
| Maximum speed: | 140 km/h | 160 km/h |
| Torque: | 94 Nm @ 4200 rpm. | 138 Nm @ 4200 rpm. |
| Model Engine: | 3K-D | |
| Engine displacement: | 1166 cm3 | 1497 cm3 |
| Fuel System: | Multi-point injection | |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | Inline | |
| Valvetrain: | OHV | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 10 | |
| Piston Stroke: | 66 mm | |
| Cylinder Bore: | 75 mm | |
| Wheel Drive: | Rear wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 5 | |
| Length: | 3945 mm | 3951 mm |
| Width: | 1505 mm | 1695 mm |
| Height: | 1375 mm | 1634 mm |
| Wheelbase: | 2335 mm | 2499 mm |
| Front track: | 1255 mm | 1455 mm |
| Rear (Back) track: | 1245 mm | 1430 mm |
| Ride height(clearance): | 134 mm | |
| Minimum volume of Luggage (trunk): | 600 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Semi-dependent beam with stabilizer lateral stability | |
| Front brakes: | Disc | Ventilated discs |
| Rear brakes: | Drum | Drum |
| Kerb Weight: | 775 kg | 1260 kg |
| Steering type: | Cone worm with recirculation balls | |
| Minimum turning circle (turning diameter): | 9 m |