Comparison Toyota Celica (TA60,RA40,RA6) 1.6 ST (86 Hp) & Toyota Corolla Verso III (facelift 2007) 2.2 D-CAT (177 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota |
| Model: | Celica | Corolla Verso |
| Generation: | Celica (TA60,RA40,RA6) | Corolla Verso III (facelift 2007) |
| Engine / modification: | 1.6 ST (86 Hp) | 2.2 D-CAT (177 Hp) |
| Production start: | 1977 year | 2007 year |
| Production end: | 1982 year | 2009 year |
| Coupe type: | Coupe | MPV |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 7 | |
| Fuel consumption / economy - urban: | 7.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.2 l/100 km | |
| Fuel consumption / economy - combined: | 6.0 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 55 l | |
| Emission standard: | Euro 4 | |
| Power: | 86 hp | 177 hp |
| Max power in: | 3600 rpm. | |
| Maximum speed: | 210 km/h | |
| Acceleration from 0 to 100 km/h: | 8.7 sec | |
| Torque: | 400 Nm @ 2000-2800 rpm. | |
| Model Engine: | 2T-B | 2AD-FHV |
| Engine position: | Front, transverse | |
| Engine displacement: | 2231 cm3 | |
| Engine oil capacity: | 4.2 l | 5.9 l |
| Coolant: | 7.5 l | 8.0 l |
| Fuel System: | Diesel - Standard diesel injection (SDI) | |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 15.7 | |
| Piston Stroke: | 96 mm | |
| Cylinder Bore: | 86 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4440 mm | |
| Width: | 1790 mm | |
| Height: | 1630 mm | |
| Front track: | 1535 mm | |
| Rear (Back) track: | 1545 mm | |
| Front suspension: | Independent type McPherson | |
| Rear suspension: | Torsion | |
| Max weight: | 2260 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1540 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.2 m |