Comparison Toyota Camry III Wagon (XV10) 3.0 V6 24V (188 Hp) & Toyota Urban Cruiser 1.33 VVT-i (100hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota |
| Model: | Camry | Urban Cruiser |
| Generation: | Camry III Wagon (XV10) | Urban Cruiser |
| Engine / modification: | 3.0 V6 24V (188 Hp) | 1.33 VVT-i (100hp) |
| Production start: | 1992 year | 2009 year |
| Production end: | 1996 year | |
| Coupe type: | Combi | Hatchback |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 6.6 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.9 l/100 km | |
| Fuel consumption / economy - combined: | 10.3 l/100 km | 5.5 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | 42 l |
| Emission standard: | Euro IV | |
| Power: | 188 hp | 100 hp |
| Max power in: | 5400 rpm. | 6000 rpm. |
| Maximum speed: | 215 km/h | 175 km/h |
| Acceleration from 0 to 100 km/h: | 9.2 sec | 12.5 sec |
| Torque: | 255 Nm @ 4400 rpm. | 132 Nm/3800 rpm. |
| Model Engine: | 3VZ-FE | 1NR-FE |
| Engine position: | Front, transverse | |
| Engine displacement: | 2959 cm3 | 1329 cm3 |
| Engine oil capacity: | 4.4 l | |
| Coolant: | 8.5 l | |
| Fuel System: | Multi-point injection | Direct injection |
| Position of cylinders: | Inline | |
| Valvetrain: | Dual VVT-i | |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 9.6 | 11.5 |
| Piston Stroke: | 82 mm | 80.5 mm |
| Cylinder Bore: | 87.5 mm | 72.5 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 5 | 6 + R |
| Length: | 4795 mm | 3930 mm |
| Width: | 1770 mm | 1725 mm |
| Height: | 1495 mm | 1525 mm |
| Wheelbase: | 2620 mm | 2460 mm |
| Front track: | 1545 mm | 1485 mm |
| Rear (Back) track: | 1490 mm | 1490 mm |
| Minimum volume of Luggage (trunk): | 533 l | 314 l |
| Maximum amount of Luggage (trunk): | 843 l | 749 l |
| Front suspension: | Independent, Spring McPherson, with stabilizer | Independent type McPherson |
| Rear suspension: | Multi-link independent | Semi-dependent on the trailing arm with transverse torsion shaft |
| Max weight: | 2150 kg | 1590 kg |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Ventilated discs | Disc |
| Kerb Weight: | 1575 kg | 1120 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 11 m | |
| Tire size: | 205/65 R15 | 195/ 60 R16 |
| Wheel rims size: | R15 | R16 |