Comparison Toyota Camry I (V10) 1.8 (90 Hp) & Seat Leon II (1P) FR 2.0 TFSI (200 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Seat |
| Model: | Camry | Leon |
| Generation: | Camry I (V10) | Leon II (1P) |
| Engine / modification: | 1.8 (90 Hp) | FR 2.0 TFSI (200 Hp) |
| Production start: | 1982 year | 2006 year |
| Production end: | 1986 year | 2009 year |
| Coupe type: | Sedan | Hatchback |
| Num. of Doors: | 4 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 11.0 l/100 km | |
| Fuel consumption / economy - extra urban: | 6.2 l/100 km | |
| Fuel consumption / economy - combined: | 7.9 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 55 l | 55 l |
| Power: | 90 hp | 200 hp |
| Max power in: | 5400 rpm. | 5100 rpm. |
| Maximum speed: | 175 km/h | 229 km/h |
| Acceleration from 0 to 100 km/h: | 12 sec | 7.3 sec |
| Torque: | 142 Nm @ 3400 rpm. | 280 Nm @ 1800 rpm. |
| Model Engine: | 1S-iLU | BWA |
| Engine position: | Front, transverse | |
| Engine displacement: | 1832 cm3 | 1984 cm3 |
| Engine oil capacity: | 4.6 l | |
| Coolant: | 8 l | |
| Fuel System: | Carburettor | Direct injection |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 9 | 10.3 |
| Piston Stroke: | 90 mm | 92.8 mm |
| Cylinder Bore: | 80.5 mm | 82.5 mm |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 5 | 6 |
| Length: | 4435 mm | 4323 mm |
| Width: | 1690 mm | 1768 mm |
| Height: | 1395 mm | 1458 mm |
| Wheelbase: | 2600 mm | 2578 mm |
| Front track: | 1527 mm | |
| Rear (Back) track: | 1508 mm | |
| Maximum amount of Luggage (trunk): | 341 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Independent, spring | |
| Max weight: | 1575 kg | 1904 kg |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Drum | Disc |
| Kerb Weight: | 1045 kg | 1334 kg |
| Max. roof load: | 100 kg | |
| Minimum turning circle (turning diameter): | 10.6 m | |
| Permitted trailer load with brakes (12%): | 1400 kg | |
| Permitted trailer load without brakes: | 530 kg | |
| Tire size: | 225/45 R17 |