Comparison Toyota Belta 1.6 (106 Hp) & Chevrolet Malibu El Camino (Sedan Pickup) 3.8 V6 (115 Hp) CAT
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Chevrolet |
| Model: | Belta | Malibu |
| Generation: | Belta | Malibu El Camino (Sedan Pickup) |
| Engine / modification: | 1.6 (106 Hp) | 3.8 V6 (115 Hp) CAT |
| Production start: | 2005 year | 1980 year |
| Production end: | 2012 year | 1981 year |
| Coupe type: | Sedan | Pick-up |
| Num. of Doors: | 4 | 2 |
| Num. of seats: | 5 | 3 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 42 l | 66 l |
| Power: | 106 hp | 115 hp |
| Max power in: | 6000 rpm. | 4000 rpm. |
| Torque: | 145 Nm @ 4200 rpm. | 237 Nm @ 2000 rpm. |
| Model Engine: | 4ZR-FE | |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 1497 cm3 | 3751 cm3 |
| Fuel System: | Multi-point injection | Carburettor |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | DOHC | OHV |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 10.5 | 8.6 |
| Piston Stroke: | 84.7 mm | 88.4 mm |
| Cylinder Bore: | 75 mm | 95 mm |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 5 | 3 |
| Length: | 4300 mm | 5121 mm |
| Width: | 1895 mm | 1826 mm |
| Height: | 1460 mm | 1380 mm |
| Wheelbase: | 2550 mm | 2974 mm |
| Front track: | 1486 mm | |
| Rear (Back) track: | 1467 mm | |
| Ride height(clearance): | 136 mm | |
| Approach angle: | 23 ° | |
| Departure angle: | 16 ° | |
| Ramp angle: | 14 ° | |
| Front overhang: | 915 mm | |
| Rear overhang: | 1232 mm | |
| Maximum amount of Luggage (trunk): | 2033 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Drum | |
| Steering type: | Steering rack and pinion | |
| Tire size: | 205/75 R14 | |
| Wheel rims size: | 6.0J x 14 |