Comparison Toyota Belta 1.3 (86 Hp) & Toyota Crown (S11) 2.0 i 24V (160 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota |
| Model: | Belta | Crown |
| Generation: | Belta | Crown (S11) |
| Engine / modification: | 1.3 (86 Hp) | 2.0 i 24V (160 Hp) |
| Production start: | 2005 year | 1998 year |
| Production end: | 2012 year | |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 4 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 42 l | 73 l |
| Power: | 86 hp | 160 hp |
| Max power in: | 6000 rpm. | 6200 rpm. |
| Acceleration from 0 to 100 km/h: | 13 sec | |
| Torque: | 124 Nm @ 4400 rpm. | 200 Nm/4400 rpm. |
| Model Engine: | 2SZ-FE, 2NZ-FE | |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 1299 cm3 | 1988 cm3 |
| Engine oil capacity: | 3.2-3.7 l | |
| Coolant: | 4.8-5.4 l | |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | DOHC |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 10.5 | 10 |
| Piston Stroke: | 73.5 mm | 75 mm |
| Cylinder Bore: | 75 mm | 75 mm |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | 4 | 4 |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4300 mm | 4695 mm |
| Width: | 1895 mm | 1695 mm |
| Height: | 1460 mm | 1460 mm |
| Wheelbase: | 2550 mm | 2780 mm |
| Front track: | 1475 mm | |
| Rear (Back) track: | 1475 mm | |
| Front suspension: | Helical spring | |
| Rear suspension: | Helical spring | |
| Max weight: | 1665 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1390 kg | |
| ABS: | yes | |
| Power steering: | Hydraulic Steering | |
| Tire size: | 185/70 R14 S |