Comparison Toyota Aygo X 1.0 VVT-i (72 Hp) CVT & Toyota Corolla I 2-door sedan (E10) 1100 (60 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota |
| Model: | Aygo X | Corolla |
| Generation: | Aygo X | Corolla I 2-door sedan (E10) |
| Engine / modification: | 1.0 VVT-i (72 Hp) CVT | 1100 (60 Hp) |
| Production start: | 2021 year | 1966 year |
| Production end: | 1970 year | |
| Coupe type: | Crossover | Sedan |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - combined: | 5 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.319 | |
| Fuel tank volume: | 35 l | 36 l |
| Combined fuel consumption (WLTP): | 4.9 l/100 km | |
| Emission standard: | Euro 6d | |
| Power: | 72 hp | 60 hp |
| Max power in: | 6000 rpm. | 6000 rpm. |
| Maximum speed: | 151 km/h | 140 km/h |
| Acceleration from 0 to 100 km/h: | 15.5 sec | |
| CO2 emissions (WLTP): | 110 g/km | |
| Torque: | 93 Nm @ 4400 rpm. | 83 Nm @ 3800 rpm. |
| Model Engine: | 1KR-FE | K |
| Engine displacement: | 998 cm3 | 1077 cm3 |
| Engine oil capacity: | 2.8 l | 2.7 l |
| Coolant: | 4.7 l | |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC, VVT-i | OHV |
| Number of cylinders: | 3 | 4 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 11.8 | 9 |
| Piston Stroke: | 84 mm | 61 mm |
| Cylinder Bore: | 71 mm | 75 mm |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | CVT | |
| Length: | 3700 mm | 3845 mm |
| Width: | 1740 mm | 1485 mm |
| Height: | 1525 mm | 1380 mm |
| Wheelbase: | 2430 mm | 2285 mm |
| Front track: | 1540 mm | 1230 mm |
| Rear (Back) track: | 1520 mm | 1220 mm |
| Ride height(clearance): | 170 mm | |
| Front overhang: | 730 mm | |
| Rear overhang: | 540 mm | |
| Minimum volume of Luggage (trunk): | 231 l | |
| Maximum amount of Luggage (trunk): | 829 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Torsion | |
| Max weight: | 1360 kg | |
| Rear brakes: | Drum | |
| Kerb Weight: | 940-1015 kg | 690 kg |
| Steering type: | Cone worm with recirculation balls | |
| Power steering: | Electric Steering | |
| Minimum turning circle (turning diameter): | 9.4 m | 9.1 m |
| Tire size: | 175/65 R17; 175/60 R18 | |
| Wheel rims size: | 17; 18 |