Comparison Skoda Rapid Spaceback (facelift 2017) TSI230 (131 Hp) DSG & Skoda 100 1.0 (39 Hp) & Ford Sierra Hatchback II 1.8 (90 Hp) Automatic
Add car |
Remove car |
Remove car |
Remove car |
| Brand: | Skoda | Skoda | Ford |
| Model: | Rapid | 100 | Sierra |
| Generation: | Rapid Spaceback (facelift 2017) | 100 | Sierra Hatchback II |
| Engine / modification: | TSI230 (131 Hp) DSG | 1.0 (39 Hp) | 1.8 (90 Hp) Automatic |
| Production start: | 2018 year | 1969 year | 1987 year |
| Production end: | 2019 year | 1977 year | 1988 year |
| Coupe type: | Hatchback | Sedan | Hatchback |
| Num. of Doors: | 5 | 4 | 5 |
| Num. of seats: | 5 | 5 | 4 |
| Fuel consumption / economy - combined: | 5.6 l/100 km | ||
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 55 l | 60 l | |
| Power: | 131 hp | 39 hp | 90 hp |
| Max power in: | 5000 rpm. | ||
| Maximum speed: | 200 km/h | ||
| Acceleration from 0 to 100 km/h: | 9.1 sec | ||
| Torque: | 225 Nm @ 1600-3500 rpm. | ||
| Engine position: | Front, transverse | ||
| Engine displacement: | 1395 cm3 | ||
| Engine oil capacity: | 4 l | ||
| Fuel System: | Direct injection | ||
| Aspiration / Turbine: | Turbocharger | ||
| Position of cylinders: | Inline | ||
| Number of cylinders: | 4 | ||
| Number of valves per cylinder: | 4 | ||
| Wheel Drive: | Front wheel drive | Rear wheel drive | |
| Number of Gears (automatic transmission): | 7 DSG | 4 | |
| Length: | 4312 mm | 4425 mm | |
| Width: | 1706 mm | 1694 mm | |
| Height: | 1475 mm | 1407 mm | |
| Wheelbase: | 2603 mm | 2608 mm | |
| Front track: | 1452 mm | ||
| Rear (Back) track: | 1468 mm | ||
| Minimum volume of Luggage (trunk): | 372 l | ||
| Maximum amount of Luggage (trunk): | 1255 l | ||
| Front suspension: | Independent type McPherson | ||
| Rear suspension: | Semi-dependent on the trailing arm with transverse torsion shaft | ||
| Front brakes: | Ventilated discs | Ventilated discs | |
| Rear brakes: | Disc | Drum | |
| Kerb Weight: | 1200 kg | ||
| ABS: | yes | yes | |
| Minimum turning circle (turning diameter): | 10 m |