Comparison Seat Toledo II (1M2) 1.8 20V (125 Hp) Automatic
Add car |
Remove car |
| Brand: | Seat |
| Model: | Toledo |
| Generation: | Toledo II (1M2) |
| Engine / modification: | 1.8 20V (125 Hp) Automatic |
| Production start: | 1999 year |
| Production end: | 2003 year |
| Coupe type: | Sedan |
| Num. of Doors: | 4 |
| Num. of seats: | 5 |
| Fuel Type: | Petrol (Gasoline) |
| Fuel tank volume: | 55 l |
| Emission standard: | Euro 3 |
| Power: | 125 hp |
| Max power in: | 6000 rpm. |
| Maximum speed: | 197 km/h |
| Acceleration from 0 to 100 km/h: | 12.5 sec |
| Torque: | 170 Nm @ 3500 rpm. |
| Model Engine: | AGN |
| Engine displacement: | 1780 cm3 |
| Engine oil capacity: | 4.5 l |
| Coolant: | 5 l |
| Position of cylinders: | Inline |
| Valvetrain: | DOHC |
| Number of cylinders: | 4 |
| Number of valves per cylinder: | 5 |
| Compression ratio: | 9.5 |
| Piston Stroke: | 86.4 mm |
| Cylinder Bore: | 81 mm |
| Wheel Drive: | Front wheel drive |
| Number of Gears (automatic transmission): | 4 |
| Length: | 4439 mm |
| Width: | 1742 mm |
| Height: | 1436 mm |
| Wheelbase: | 2513 mm |
| Front track: | 1513 mm |
| Rear (Back) track: | 1492 mm |
| Minimum volume of Luggage (trunk): | 500 l |
| Maximum amount of Luggage (trunk): | 830 l |
| Max weight: | 1809 kg |
| Kerb Weight: | 1289 kg |
| Power steering: | Hydraulic Steering |
| Minimum turning circle (turning diameter): | 11.2 m |
| Permitted trailer load with brakes (12%): | 1200 kg |
| Tire size: | 195/65 R15 |
| Wheel rims size: | 6J x 15 |