Car technical specifications and fuel economy / consumption / mpg

Comparison Seat Toledo I (1L) 1.9 D (64 Hp) & Land Rover Defender 90 2.5 TDi (113 Hp)


Add car
Seat Toledo I (1L) 1.9 D (64 Hp)
Remove car
Land Rover Defender 90 2.5 TDi (113 Hp)
Remove car
Brand: Seat Land Rover
Model: Toledo Defender
Generation: Toledo I (1L) Defender 90
Engine / modification: 1.9 D (64 Hp) 2.5 TDi (113 Hp)
Production start: 1991 year 1996 year
Production end: 1999 year 1999 year
Coupe type: Sedan Off-road vehicle
Num. of Doors: 4 2
Num. of seats: 5 6
Fuel consumption / economy - combined: 5.8 l/100 km 10.6 l/100 km
Fuel Type: Diesel Diesel
Fuel tank volume: 55 l 60 l
Power: 64 hp 113 hp
Max power in: 4400 rpm. 4000 rpm.
Maximum speed: 165 km/h 129 km/h
Acceleration from 0 to 100 km/h: 16.5 sec 18.1 sec
Torque: 124 Nm @ 2000 rpm. 265 Nm/1800 rpm.
Model Engine: 1Y
Engine position: Front, transverse Front, longitudinal
Engine displacement: 1896 cm3 2496 cm3
Engine oil capacity: 4.5 l
Coolant: 6.2 l
Fuel System: Diesel - Standard diesel injection (SDI) Diesel Commonrail
Aspiration / Turbine: Turbocharging
Position of cylinders: Inline Inline
Valvetrain: OHC
Number of cylinders: 4 4
Number of valves per cylinder: 2 2
Compression ratio: 22.5 19.5
Piston Stroke: 95.5 mm 97 mm
Cylinder Bore: 79.5 mm 90.5 mm
Wheel Drive: Front wheel drive All wheel drive (4x4)
Number of Gears (automatic transmission): - -
Number of Gears (manual transmission): 5 5
Length: 4321 mm 3870 mm
Width: 1662 mm 1790 mm
Height: 1424 mm 1963 mm
Wheelbase: 2471 mm 2230 mm
Front track: 1429 mm 1486 mm
Rear (Back) track: 1422 mm 1486 mm
Minimum volume of Luggage (trunk): 550 l 1600 l
Maximum amount of Luggage (trunk): 1360 l
Front suspension: Wishbone One-piece beam bridge
Rear suspension: Helical spring One-piece beam bridge
Max weight: 1550 kg 2550 kg
Front brakes: Disc Disc
Rear brakes: Drum Disc
Kerb Weight: 1050 kg 1695 kg
ABS: yes yes
Steering type: Steering rack and pinion
Power steering: Hydraulic Steering Hydraulic Steering
Tire size: 175/70 R13 205 R16 S