Comparison Seat Toledo I (1L) 1.8 i (88 Hp) & Chrysler Grand Voyager II 3.3 V6 (163 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Seat | Chrysler |
| Model: | Toledo | Grand Voyager |
| Generation: | Toledo I (1L) | Grand Voyager II |
| Engine / modification: | 1.8 i (88 Hp) | 3.3 V6 (163 Hp) |
| Production start: | 1991 year | 1990 year |
| Production end: | 1996 year | 1995 year |
| Coupe type: | Sedan | Minivan |
| Num. of Doors: | 4 | 3 |
| Num. of seats: | 5 | 7 |
| Fuel consumption / economy - combined: | 11 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 55 l | 76 l |
| Power: | 88 hp | 163 hp |
| Max power in: | 4800 rpm. | |
| Maximum speed: | 180 km/h | |
| Acceleration from 0 to 100 km/h: | 12.9 sec | |
| Torque: | 260 Nm @ 3750 rpm. | |
| Model Engine: | RP | |
| Engine position: | Front, transverse | |
| Engine displacement: | 3301 cm3 | |
| Engine oil capacity: | 4 l | |
| Coolant: | 7 l | |
| Fuel System: | Multi-point injection | |
| Position of cylinders: | V engine | |
| Number of cylinders: | 6 | |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 8.9 | |
| Piston Stroke: | 81 mm | |
| Cylinder Bore: | 93 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (automatic transmission): | 4 | |
| Length: | 4896 mm | |
| Width: | 1830 mm | |
| Height: | 1707 mm | |
| Wheelbase: | 3031 mm | |
| Front track: | 1522 mm | |
| Rear (Back) track: | 1578 mm | |
| Minimum volume of Luggage (trunk): | 328 l | |
| Maximum amount of Luggage (trunk): | 3990 l | |
| Front suspension: | Wishbone | |
| Rear suspension: | One-piece beam bridge | |
| Max weight: | 2550 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1760 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Tire size: | 205/70 R15 |