Comparison Seat Leon III SC Cupra 2.0 TSI (265 Hp) DSG start/stop & &
Add car |
Remove car |
Remove car |
Remove car |
| Brand: | Seat | ||
| Model: | Leon | ||
| Generation: | Leon III SC | ||
| Engine / modification: | Cupra 2.0 TSI (265 Hp) DSG start/stop | ||
| Production start: | 2013 year | ||
| Production end: | 2015 year | ||
| Coupe type: | Coupe | ||
| Num. of Doors: | 3 | ||
| Num. of seats: | 5 | ||
| Fuel consumption / economy - urban: | 8.2 l/100 km | ||
| Fuel consumption / economy - extra urban: | 5.4 l/100 km | ||
| Fuel consumption / economy - combined: | 6.4 l/100 km | ||
| Fuel Type: | Petrol (Gasoline) | ||
| Fuel tank volume: | 50 l | ||
| Emission standard: | Euro 6 | ||
| CO2 emissions: | 149 g/km | ||
| Power: | 265 hp | ||
| Max power in: | 5350-6600 rpm. | ||
| Maximum speed: | 250 km/h | ||
| Acceleration from 0 to 100 km/h: | 5.8 sec | ||
| Torque: | 350 Nm @ 1700-5300 rpm. | ||
| Model Engine: | CJXE | ||
| Engine position: | Front, transverse | ||
| Engine displacement: | 1984 cm3 | ||
| Engine oil capacity: | 5.7 l | ||
| Fuel System: | Direct injection | ||
| Aspiration / Turbine: | Turbocharging | ||
| Position of cylinders: | Inline | ||
| Number of cylinders: | 4 | ||
| Number of valves per cylinder: | 4 | ||
| Compression ratio: | 9.3 | ||
| Piston Stroke: | 92.8 mm | ||
| Cylinder Bore: | 82.5 mm | ||
| Wheel Drive: | Front wheel drive | ||
| Number of Gears (automatic transmission): | 6 DSG | ||
| Length: | 4236 mm | ||
| Width: | 1810 mm | ||
| Height: | 1423 mm | ||
| Wheelbase: | 2596 mm | ||
| Front track: | 1534 mm | ||
| Rear (Back) track: | 1508 mm | ||
| Minimum volume of Luggage (trunk): | 380 l | ||
| Maximum amount of Luggage (trunk): | 1150 l | ||
| Max weight: | 1890 kg | ||
| Kerb Weight: | 1395 kg | ||
| ABS: | yes | ||
| Steering type: | Steering rack and pinion |