Comparison Seat Leon III Cupra 2.0 TSI (265 Hp) DSG start/stop & Toyota Carina I (TA1) 1.6 (75 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Seat | Toyota |
| Model: | Leon | Carina |
| Generation: | Leon III | Carina I (TA1) |
| Engine / modification: | Cupra 2.0 TSI (265 Hp) DSG start/stop | 1.6 (75 Hp) |
| Production start: | 2013 year | 1976 year |
| Production end: | 2015 year | 1978 year |
| Coupe type: | Hatchback | |
| Num. of Doors: | 5 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 8.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.7 l/100 km | |
| Fuel consumption / economy - combined: | 6.6 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | |
| Emission standard: | Euro 6 | |
| CO2 emissions: | 154 g/km | |
| Power: | 265 hp | 75 hp |
| Max power in: | 5350-6600 rpm. | |
| Maximum speed: | 250 km/h | |
| Acceleration from 0 to 100 km/h: | 5.9 sec | |
| Torque: | 350 Nm @ 1700-5300 rpm. | |
| Model Engine: | CJXE | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1984 cm3 | |
| Engine oil capacity: | 5.7 l | |
| Fuel System: | Direct injection | |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9.3 | |
| Piston Stroke: | 92.8 mm | |
| Cylinder Bore: | 82.5 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (automatic transmission): | 6 DSG | |
| Length: | 4271 mm | |
| Width: | 1816 mm | |
| Height: | 1435 mm | |
| Wheelbase: | 2631 mm | |
| Front track: | 1534 mm | |
| Rear (Back) track: | 1508 mm | |
| Minimum volume of Luggage (trunk): | 380 l | |
| Maximum amount of Luggage (trunk): | 1210 l | |
| Max weight: | 1910 kg | |
| Kerb Weight: | 1421 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion |