Car technical specifications and fuel economy / consumption / mpg

Comparison Seat Leon III 1.6 TDI (105 Hp) DSG start/stop & Volvo S80 II (facelift 2011) 2.4 D5 (215 Hp) MT


Add car
Seat Leon III 1.6 TDI (105 Hp) DSG start/stop
Remove car
Volvo S80 II (facelift 2011) 2.4 D5 (215 Hp) MT
Remove car
Brand: Seat Volvo
Model: Leon S80
Generation: Leon III S80 II (facelift 2011)
Engine / modification: 1.6 TDI (105 Hp) DSG start/stop 2.4 D5 (215 Hp) MT
Production start: 2012 year 2011 year
Production end: 2015 year 2013 year
Coupe type: Hatchback Sedan
Num. of Doors: 5 4
Num. of seats: 5 5
Fuel consumption / economy - urban: 4.6 l/100 km 6.1 l/100 km
Fuel consumption / economy - extra urban: 3.5 l/100 km 4.2 l/100 km
Fuel consumption / economy - combined: 3.9 l/100 km 4.9 l/100 km
Fuel Type: Diesel Diesel
Fuel tank volume: 50 l 70 l
Emission standard: Euro 5 EURO V
CO2 emissions: 102 g/km
Power: 105 hp 215 hp
Max power in: 3000-4000 rpm. 4000 rpm.
Maximum speed: 191 km/h
Acceleration from 0 to 100 km/h: 10.7 sec 7.6 sec
Torque: 250 Nm @ 1500-2750 rpm. 420 Nm/1500-3250 rpm.
Model Engine: CLHA D5244T11
Engine position: Front, transverse Front, transverse
Engine displacement: 1598 cm3 2400 cm3
Engine oil capacity: 4.6-4.7 l
Fuel System: Diesel Commonrail Diesel Commonrail
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler) Turbo / Intercooler (Turbocharging / Intercooler)
Position of cylinders: Inline Inline
Number of cylinders: 4 5
Number of valves per cylinder: 4
Compression ratio: 16.2
Piston Stroke: 80.5 mm 81 mm
Cylinder Bore: 79.5 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (automatic transmission): 7 DSG
Number of Gears (manual transmission): 6
Length: 4263 mm 4851 mm
Width: 1816 mm 1861 mm
Height: 1459 mm 1493 mm
Wheelbase: 2636 mm 2835 mm
Front track: 1549 mm 1588 mm
Rear (Back) track: 1520 mm 1585 mm
Minimum volume of Luggage (trunk): 380 l 480 l
Maximum amount of Luggage (trunk): 1210 l
Max weight: 1810 kg 2190 kg
Kerb Weight: 1306 kg 1641 kg
ABS: yes yes
Steering type: Steering rack and pinion Steering rack and pinion
Minimum turning circle (turning diameter): 11.7 m