Comparison Seat Leon II (1P, facelift 2009) 1.9 TDI PD (90 Hp) & Mercedes-Benz S-class (W108) 280 SE 3.5 V8 (200 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Seat | Mercedes-Benz |
| Model: | Leon | S-class |
| Generation: | Leon II (1P, facelift 2009) | S-class (W108) |
| Engine / modification: | 1.9 TDI PD (90 Hp) | 280 SE 3.5 V8 (200 Hp) Automatic |
| Production start: | 2009 year | 1970 year |
| Production end: | 2010 year | 1972 year |
| Coupe type: | Hatchback | Sedan |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 13 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 55 l | 82 l |
| Power: | 90 hp | 200 hp |
| Max power in: | 4000 rpm. | 5800 rpm. |
| Maximum speed: | 174 km/h | 205 km/h |
| Acceleration from 0 to 100 km/h: | 13.3 sec | 9.4 sec |
| Torque: | 210 Nm @ 1800 rpm. | 286 Nm @ 4000 rpm. |
| Model Engine: | BXF | M 116 E 35 / 116.980 |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 1896 cm3 | 3499 cm3 |
| Engine oil capacity: | 4.3 l | 7.5 l |
| Coolant: | 5.6 l | 13.2 l |
| Fuel System: | Pump-nozzle (Unit Injector) | |
| Position of cylinders: | Inline | |
| Valvetrain: | SOHC | |
| Number of cylinders: | 4 | 8 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 19 | 9.5 |
| Piston Stroke: | 95.5 mm | 65.8 mm |
| Cylinder Bore: | 79.5 mm | 92 mm |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4315 mm | 4900 mm |
| Width: | 1768 mm | 1810 mm |
| Height: | 1458 mm | 1440 mm |
| Wheelbase: | 2578 mm | 2750 mm |
| Front track: | 1533 mm | 1482 mm |
| Rear (Back) track: | 1517 mm | 1485 mm |
| Front overhang: | 949 mm | |
| Rear overhang: | 788 mm | |
| Minimum volume of Luggage (trunk): | 341 l | |
| Maximum amount of Luggage (trunk): | 1166 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | Double wishbone |
| Rear suspension: | Multi-link independent | |
| Max weight: | 1868 kg | 2055 kg |
| Front brakes: | Ventilated discs | Disc |
| Rear brakes: | Disc | Disc |
| Kerb Weight: | 1290 kg | 1550 kg |
| Steering type: | Steering rack and pinion | Cone worm with recirculation balls |
| Power steering: | Hydraulic Steering | Hydraulic Steering |
| Max. roof load: | 75 kg | |
| Permitted trailer load with brakes (8%): | 1500 kg | |
| Minimum turning circle (turning diameter): | 10.7 m | |
| Permitted trailer load with brakes (12%): | 1400 kg | |
| Permitted trailer load without brakes: | 680 kg | |
| Tire size: | 205/55 R16 | |
| Wheel rims size: | 6.5J x 16 | 6J x 14 |