Comparison Seat Cordoba Vario I (facelift 1999) 1.9 SDI (68 Hp) & Ford Shelby II (facelift 2010) GT 500 5.4 V8 (548 Hp) & Ford Escort II Turnier 1.3 (BADR) (54 Hp)
Add car |
Remove car |
Remove car |
Remove car |
| Brand: | Seat | Ford | Ford |
| Model: | Cordoba | Shelby | Escort |
| Generation: | Cordoba Vario I (facelift 1999) | Shelby II (facelift 2010) | Escort II Turnier |
| Engine / modification: | 1.9 SDI (68 Hp) | GT 500 5.4 V8 (548 Hp) | 1.3 (BADR) (54 Hp) |
| Production start: | 1999 year | 2010 year | 1976 year |
| Production end: | 2000 year | 2014 year | 1981 year |
| Coupe type: | Coupe | ||
| Num. of Doors: | 5 | 2 | |
| Num. of seats: | 5 | 4 | |
| Fuel consumption / economy - urban: | 16.8 l/100 km | ||
| Fuel consumption / economy - extra urban: | 10.7 l/100 km | ||
| Fuel consumption / economy - combined: | 13.8 l/100 km | ||
| Fuel Type: | Diesel | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.35 | ||
| Fuel tank volume: | 45 l | 60 l | |
| Power: | 68 hp | 548 hp | 54 hp |
| Max power in: | 6200 rpm. | ||
| Torque: | 692 Nm @ 4500 rpm. | ||
| Model Engine: | AGP, AQM | ||
| Engine position: | Front, longitudinal | ||
| Engine displacement: | 5408 cm3 | ||
| Engine oil capacity: | 4.5 l | ||
| Coolant: | 6 l | ||
| Fuel System: | Direct injection | Multi-point injection | |
| Aspiration / Turbine: | Mechanical supercharging (Compressor) | ||
| Position of cylinders: | V engine | ||
| Valvetrain: | DOHC | ||
| Number of cylinders: | 8 | ||
| Number of valves per cylinder: | 4 | ||
| Compression ratio: | 8.4 | ||
| Piston Stroke: | 105.8 mm | ||
| Cylinder Bore: | 90.2 mm | ||
| Wheel Drive: | Rear wheel drive | ||
| Number of Gears (manual transmission): | 6 | ||
| Length: | 4780 mm | ||
| Width: | 1877 mm | ||
| Height: | 1384 mm | ||
| Wheelbase: | 2720 mm | ||
| Front track: | 1572 mm | ||
| Rear (Back) track: | 1587 mm | ||
| Front brakes: | Ventilated discs | ||
| Rear brakes: | Ventilated discs | ||
| Kerb Weight: | 1780 kg | ||
| ABS: | yes | ||
| Steering type: | Steering rack and pinion | ||
| Minimum turning circle (turning diameter): | 11.27 m | ||
| Tire size: | 255/45 ZR18; 285/40 ZR18 | ||
| Wheel rims size: | R18 |