Comparison Seat Cordoba Vario I (facelift 1999) 1.9 SDI (68 Hp) & Ford Shelby II (facelift 2010) GT 500 5.4 V8 (548 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Seat | Ford |
| Model: | Cordoba | Shelby |
| Generation: | Cordoba Vario I (facelift 1999) | Shelby II (facelift 2010) |
| Engine / modification: | 1.9 SDI (68 Hp) | GT 500 5.4 V8 (548 Hp) |
| Production start: | 1999 year | 2010 year |
| Production end: | 2000 year | 2014 year |
| Coupe type: | Coupe | |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 5 | 4 |
| Fuel consumption / economy - urban: | 16.8 l/100 km | |
| Fuel consumption / economy - extra urban: | 10.7 l/100 km | |
| Fuel consumption / economy - combined: | 13.8 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Drag coefficient: | 0.35 | |
| Fuel tank volume: | 45 l | 60 l |
| Power: | 68 hp | 548 hp |
| Max power in: | 6200 rpm. | |
| Torque: | 692 Nm @ 4500 rpm. | |
| Model Engine: | AGP, AQM | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 5408 cm3 | |
| Engine oil capacity: | 4.5 l | |
| Coolant: | 6 l | |
| Fuel System: | Direct injection | Multi-point injection |
| Aspiration / Turbine: | Mechanical supercharging (Compressor) | |
| Position of cylinders: | V engine | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 8 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 8.4 | |
| Piston Stroke: | 105.8 mm | |
| Cylinder Bore: | 90.2 mm | |
| Wheel Drive: | Rear wheel drive | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4780 mm | |
| Width: | 1877 mm | |
| Height: | 1384 mm | |
| Wheelbase: | 2720 mm | |
| Front track: | 1572 mm | |
| Rear (Back) track: | 1587 mm | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Ventilated discs | |
| Kerb Weight: | 1780 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.27 m | |
| Tire size: | 255/45 ZR18; 285/40 ZR18 | |
| Wheel rims size: | R18 |