Comparison Seat Cordoba Coupe I 2.0 i (115 Hp) & Triumph 1500 1.5 (62 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Seat | Triumph |
| Model: | Cordoba | 1500 |
| Generation: | Cordoba Coupe I | 1500 |
| Engine / modification: | 2.0 i (115 Hp) | 1.5 (62 Hp) |
| Production start: | 1993 year | 1970 year |
| Production end: | 1999 year | 1974 year |
| Coupe type: | Coupe | |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 3 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 9.9 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.7 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 45 l | |
| Power: | 115 hp | 62 hp |
| Max power in: | 5400 rpm. | |
| Maximum speed: | 198 km/h | |
| Acceleration from 0 to 100 km/h: | 10.1 sec | |
| Torque: | 166 Nm @ 3200 rpm. | |
| Model Engine: | 2E/AGG | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1984 cm3 | |
| Engine oil capacity: | 4 l | |
| Coolant: | 6.6 l | |
| Fuel System: | Multi-point indirect injection | |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | Inline | |
| Valvetrain: | SOHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 10 | |
| Piston Stroke: | 92.8 mm | |
| Cylinder Bore: | 82.5 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4142 mm | |
| Width: | 1640 mm | |
| Height: | 1409 mm | |
| Wheelbase: | 2440 mm | |
| Front track: | 1430 mm | |
| Rear (Back) track: | 1394 mm | |
| Minimum volume of Luggage (trunk): | 455 l | |
| Maximum amount of Luggage (trunk): | 762 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Torsion | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Tire size: | 185/55 R15 | |
| Wheel rims size: | 6J x 15 |