Comparison Seat Ateca I (facelift 2020) 2.0 TDI (115 Hp)
Add car |
Remove car |
| Brand: | Seat |
| Model: | Ateca |
| Generation: | Ateca I (facelift 2020) |
| Engine / modification: | 2.0 TDI (115 Hp) |
| Production start: | 2020 year |
| Coupe type: | SUV |
| Num. of Doors: | 5 |
| Num. of seats: | 5 |
| Fuel Type: | Diesel |
| Fuel tank volume: | 50 l |
| Emission standard: | Euro 6 AP |
| Power: | 115 hp |
| Max power in: | 2750-4250 rpm. |
| Maximum speed: | 185 km/h |
| Acceleration from 0 to 100 km/h: | 10.9 sec |
| CO2 emissions (WLTP): | 127-142 g/km |
| Torque: | 300 Nm @ 1600-2500 rpm. |
| Model Engine: | DTR |
| Engine displacement: | 1968 cm3 |
| Fuel System: | Diesel Commonrail |
| Position of cylinders: | Inline |
| Number of cylinders: | 4 |
| Number of valves per cylinder: | 4 |
| Compression ratio: | 16 |
| Piston Stroke: | 95.5 mm |
| Cylinder Bore: | 81 mm |
| Wheel Drive: | Front wheel drive |
| Number of Gears (manual transmission): | 6 |
| Length: | 4381 mm |
| Width: | 1841 mm |
| Width including mirrors: | 2078 mm |
| Height: | 1615 mm |
| Wheelbase: | 2638 mm |
| Front track: | 1576 mm |
| Rear (Back) track: | 1541 mm |
| Front overhang: | 871 mm |
| Rear overhang: | 872 mm |
| Minimum volume of Luggage (trunk): | 510 l |
| Maximum amount of Luggage (trunk): | 1604 l |
| Front suspension: | Independent type McPherson |
| Max weight: | 2000 kg |
| Front brakes: | Ventilated discs |
| Rear brakes: | Disc |
| Kerb Weight: | 1393 kg |
| Power steering: | Electric Steering |
| Max. roof load: | 75 kg |
| Permitted trailer load with brakes (12%): | 1500 kg |
| Permitted trailer load without brakes: | 730 kg |
| Permitted towbar download: | 88 kg |
| Tire size: | 215/55 R17; 215/50 R18; 235/40 R19 |
| Wheel rims size: | 7J x 17; 7J x 18; 8J x 19 |