Car technical specifications and fuel economy / consumption / mpg

Comparison Seat Altea XL (facelift 2009) 1.2 TSI (105 Hp) Ecomotive start/stop & Ford Shelby I Cabrio GT 350 4.7 V8 (310 Hp)


Add car
Seat Altea XL (facelift 2009) 1.2 TSI (105 Hp) Ecomotive start/stop
Remove car
Ford Shelby I Cabrio GT 350 4.7 V8 (310 Hp)
Remove car
Brand: Seat Ford
Model: Altea Shelby
Generation: Altea XL (facelift 2009) Shelby I Cabrio
Engine / modification: 1.2 TSI (105 Hp) Ecomotive start/stop GT 350 4.7 V8 (310 Hp)
Production start: 2009 year 1966 year
Production end: 1970 year
Coupe type: MPV Cabriolet
Num. of Doors: 5 2
Num. of seats: 5 4
Fuel consumption / economy - urban: 6.9 l/100 km
Fuel consumption / economy - extra urban: 5.1 l/100 km
Fuel consumption / economy - combined: 5.7 l/100 km
Fuel Type: Petrol (Gasoline) Petrol (Gasoline)
Fuel tank volume: 55 l 61 l
Emission standard: EURO V
CO2 emissions: 132 g/km
Power: 105 hp 310 hp
Max power in: 5000 rpm. 6000 rpm.
Maximum speed: 184 km/h
Acceleration from 0 to 100 km/h: 11.3 sec
Torque: 175 Nm/1550-4100 rpm. 446 Nm @ 4200 rpm.
Engine position: Front, transverse Front, longitudinal
Engine displacement: 1197 cm3 4727 cm3
Fuel System: Direct injection Carburettor
Aspiration / Turbine: Turbocharging
Position of cylinders: Inline V engine
Number of cylinders: 4 8
Number of valves per cylinder: 2 2
Compression ratio: 10 10.5
Piston Stroke: 75.6 mm 72.89 mm
Cylinder Bore: 71 mm 101.6 mm
Wheel Drive: Front wheel drive Rear wheel drive
Number of Gears (manual transmission): 6 4
Length: 4469 mm 4613 mm
Width: 1768 mm 1732 mm
Height: 1581 mm 1300 mm
Wheelbase: 2578 mm 2743 mm
Front track: 1541 mm 1435 mm
Rear (Back) track: 1517 mm 1448 mm
Minimum volume of Luggage (trunk): 532 l
Front suspension: Independent, Spring McPherson, with stabilizer
Rear suspension: Multi-link independent
Max weight: 1880 kg
Front brakes: Ventilated discs Disc
Rear brakes: Disc Drum
Kerb Weight: 1360 kg 1330 kg
ABS: yes
Steering type: Steering rack and pinion
Power steering: Electric Steering
Minimum turning circle (turning diameter): 10.7 m 11.6 m