Comparison Saab 99 1.7 (81 Hp) & Volvo V60 (2013 facelift) 2.0 D4 (181 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Saab | Volvo |
| Model: | 99 | V60 |
| Generation: | 99 | V60 (2013 facelift) |
| Engine / modification: | 1.7 (81 Hp) | 2.0 D4 (181 Hp) Automatic |
| Production start: | 1967 year | 2013 year |
| Production end: | 1968 year | 2015 year |
| Coupe type: | Sedan | Combi |
| Num. of Doors: | 4 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 4.3 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 67.5 l | |
| CO2 emissions: | 112 g/km | |
| Power: | 81 hp | 181 hp |
| Max power in: | 5200 rpm. | 4250 rpm. |
| Maximum speed: | 145 km/h | 225 km/h |
| Acceleration from 0 to 100 km/h: | 7.6 sec | |
| Torque: | 400 Nm/1750-2500 rpm. | |
| Model Engine: | Triumph 1,7 litre - 80 ch DIN | D4204T5 |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1709 cm3 | 1969 cm3 |
| Fuel System: | Carburettor | Diesel Commonrail |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | V engine | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 9 | 15.8 |
| Piston Stroke: | 78 mm | 93.2 mm |
| Cylinder Bore: | 83.5 mm | 82 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 6 | |
| Number of Gears (manual transmission): | 4 | |
| Length: | 4530 mm | 4635 mm |
| Width: | 1680 mm | 1899 mm |
| Height: | 1450 mm | 1484 mm |
| Wheelbase: | 2470 mm | 2776 mm |
| Front track: | 1390 mm | 1588-1578 mm |
| Rear (Back) track: | 1400 mm | 1585-1575 mm |
| Ride height(clearance): | 136 mm | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Independent, spring | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 925 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.5 - 12.4 m |