Comparison Renault Triber 1.0 (72 Hp) Automatic & Opel Corsa D (Facelift 2011) 3-door 1.3 CDTI (75 Hp) Start/Stop
Add car |
Remove car |
Remove car |
| Brand: | Renault | Opel |
| Model: | Triber | Corsa |
| Generation: | Triber | Corsa D (Facelift 2011) 3-door |
| Engine / modification: | 1.0 (72 Hp) Automatic | 1.3 CDTI (75 Hp) Start/Stop |
| Production start: | 2019 year | 2011 year |
| Production end: | 2014 year | |
| Coupe type: | MPV | Hatchback |
| Num. of Doors: | 5 | 3 |
| Num. of seats: | 5-7 | 5 |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Drag coefficient: | 0.32 | |
| Fuel tank volume: | 40 l | 42 l |
| Emission standard: | Euro 5 | |
| Power: | 72 hp | 75 hp |
| Max power in: | 4000 rpm. | |
| Maximum speed: | 163 km/h | |
| Acceleration from 0 to 100 km/h: | 14.5 sec | |
| Torque: | 96 Nm | 169 Nm @ 1750-2500 rpm. |
| Model Engine: | HR10DE | A13DTC |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 998 cm3 | 1248 cm3 |
| Engine oil capacity: | 3.0 l | 3.5 l |
| Fuel System: | Diesel Commonrail | |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 3 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 16.8 | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 5 | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 3990 mm | 3999 mm |
| Width: | 1739 mm | 1737 mm |
| Width including mirrors: | 1944 mm | |
| Height: | 1643 mm | 1488 mm |
| Wheelbase: | 2636 mm | 2511 mm |
| Front track: | 1485 mm | |
| Rear (Back) track: | 1478 mm | |
| Ride height(clearance): | 140 mm | |
| Minimum volume of Luggage (trunk): | 84 l | 285 l |
| Maximum amount of Luggage (trunk): | 625 l | 1050 l |
| Max weight: | 1555 kg | |
| Kerb Weight: | 947 kg | 1130 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Electric Steering | |
| Minimum turning circle (turning diameter): | 10.4 m |