Comparison Renault Master III (Phase II, 2014) Panel Van 2.3 dCi (110 Hp) L2H3 MH35 & Lada 21053 1.5i (71 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Renault | Lada |
| Model: | Master | 2105 |
| Generation: | Master III (Phase II, 2014) Panel Van | 21053 |
| Engine / modification: | 2.3 dCi (110 Hp) L2H3 MH35 | 1.5i (71 Hp) |
| Production start: | 2017 year | 2005 year |
| Production end: | 2018 year | 2007 year |
| Num. of Doors: | 4 | |
| Num. of seats: | 3 | |
| Fuel consumption / economy - urban: | 8.8-9.3 l/100 km | |
| Fuel consumption / economy - extra urban: | 7.0-7.5 l/100 km | |
| Fuel consumption / economy - combined: | 7.7-8.2 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 105 l | |
| Emission standard: | Euro 6 | |
| CO2 emissions: | 201 - 212 g/km | |
| Power: | 110 hp | 71 hp |
| Max power in: | 3500 rpm. | 5600 rpm. |
| Torque: | 285 Nm @ 1500 rpm. | 104 Nm @ 3400 rpm. |
| Model Engine: | M9T | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 2298 cm3 | 1450 cm3 |
| Engine oil capacity: | 8 l | |
| Coolant: | 11 l | |
| Fuel System: | Diesel Commonrail | Mono-point injection |
| Aspiration / Turbine: | Turbocharger | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 8.5 | |
| Piston Stroke: | 101.5 mm | 80 mm |
| Cylinder Bore: | 85 mm | 76 mm |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (manual transmission): | 6 | |
| Length: | 5548 mm | |
| Width: | 2070 mm | |
| Width including mirrors: | 2470 mm | |
| Height: | 2749 mm | |
| Wheelbase: | 3682 mm | |
| Front track: | 1750 mm | |
| Rear (Back) track: | 1730 mm | |
| Ride height(clearance): | 173 mm | |
| Front overhang: | 842 mm | |
| Rear overhang: | 1024 mm | |
| Maximum amount of Luggage (trunk): | 12300 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | The spring | |
| Max weight: | 3500 kg | |
| Kerb Weight: | 1984 kg | |
| Minimum turning circle (turning diameter): | 14.1 m | |
| Permitted trailer load with brakes (12%): | 2500 kg | |
| Permitted trailer load without brakes: | 750 kg | |
| Tire size: | 225/65 R16 | |
| Wheel rims size: | R16 |