Comparison Porsche 911 Targa (997) Targa 4 3.6 (325 Hp) & Toyota Corona (T140) 1.5 (90 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Porsche | Toyota |
| Model: | 911 | Corona |
| Generation: | 911 Targa (997) | Corona (T140) |
| Engine / modification: | Targa 4 3.6 (325 Hp) | 1.5 (90 Hp) |
| Production start: | 2006 year | 1982 year |
| Production end: | 2008 year | 1988 year |
| Coupe type: | Targa | Sedan |
| Num. of Doors: | 2 | |
| Num. of seats: | 4 | |
| Fuel consumption / economy - urban: | 16.6 l/100 km | |
| Fuel consumption / economy - extra urban: | 8.4 l/100 km | |
| Fuel consumption / economy - combined: | 11.3 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.30 | |
| Fuel tank volume: | 67 l | |
| CO2 emissions: | 272 g/km | |
| Power: | 325 hp | 90 hp |
| Max power in: | 6800 rpm. | 5400 rpm. |
| Maximum speed: | 280 km/h | |
| Acceleration from 0 to 100 km/h: | 5.3 sec | |
| Torque: | 370 Nm @ 4250 rpm. | 130 Nm/4200 rpm. |
| Model Engine: | M 96/05 | |
| Engine position: | Rear, longitudinal | Front, transverse |
| Engine displacement: | 3596 cm3 | 1497 cm3 |
| Engine oil capacity: | 8.25 l | |
| Coolant: | 32 l | |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Boxer | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 11.3 | 9.4 |
| Piston Stroke: | 87 mm | |
| Cylinder Bore: | 74 mm | |
| Wheel Drive: | All wheel drive (4x4) | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4427 mm | |
| Width: | 1852 mm | |
| Height: | 1310 mm | |
| Wheelbase: | 2350 mm | |
| Maximum amount of Luggage (trunk): | 105 l | |
| Front suspension: | McPherson | |
| Rear suspension: | Multi-link independent | |
| Max weight: | 1900 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Ventilated discs | |
| Kerb Weight: | 1510 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 10.9 m | |
| Tire size: | 235/40 ZR18; 295/35 ZR18 | |
| Wheel rims size: | 8J x 18; 11J x 18 |