Comparison Porsche 911 (997, facelift 2008) Carrera 4 3.6 (345 Hp) PDK & Toyota Mark X 3.0 i ( 230 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Porsche | Toyota |
| Model: | 911 | Mark X |
| Generation: | 911 (997, facelift 2008) | Mark X |
| Engine / modification: | Carrera 4 3.6 (345 Hp) PDK | 3.0 i ( 230 Hp) |
| Production start: | 2008 year | 2004 year |
| Production end: | 2011 year | 2009 year |
| Coupe type: | Coupe | Sedan |
| Num. of Doors: | 2 | |
| Num. of seats: | 4 | |
| Fuel consumption / economy - urban: | 15.2 l/100 km | |
| Fuel consumption / economy - extra urban: | 7.2 l/100 km | |
| Fuel consumption / economy - combined: | 10.1 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.30 | |
| Fuel tank volume: | 67 l | |
| Emission standard: | Euro 5 | |
| CO2 emissions: | 237 g/km | |
| Power: | 345 hp | 230 hp |
| Max power in: | 6500 rpm. | 6000 rpm. |
| Maximum speed: | 282 km/h | |
| Acceleration from 0 to 100 km/h: | 4.8 sec | |
| Torque: | 390 Nm @ 4400 rpm. | 284 Nm @ 4800 rpm. |
| Model Engine: | MA1.02 | |
| Engine position: | Rear, longitudinal | Front, longitudinal |
| Engine displacement: | 3614 cm3 | 2997 cm3 |
| Engine oil capacity: | 7.5 l | |
| Coolant: | 29-32 l | |
| Fuel System: | Direct injection | Multi-point injection |
| Position of cylinders: | Boxer | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 6 | |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 12.5 | 10.1 |
| Piston Stroke: | 86 mm | |
| Cylinder Bore: | 86 mm | |
| Wheel Drive: | All wheel drive (4x4) | |
| Number of Gears (automatic transmission): | 7 PDK | |
| Length: | 4435 mm | |
| Width: | 1852 mm | |
| Height: | 1310 mm | |
| Wheelbase: | 2350 mm | |
| Maximum amount of Luggage (trunk): | 105 l | |
| Front suspension: | McPherson | |
| Rear suspension: | Multi-link independent | |
| Max weight: | 1900 kg | |
| Kerb Weight: | 1500 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 10.9 m | |
| Tire size: | 235/40 ZR18; 295/35 ZR18 | |
| Wheel rims size: | 8J x 18; 11J x 18 |