Comparison Peugeot 505 Break (551D) 2.5 Diesel (70 Hp) & Ford Scorpio I Turnier (GGE) 2.9i 4x4 (145 Hp) & Opel Manta B CC 2.0 (90 Hp)
Add car |
Remove car |
Remove car |
Remove car |
| Brand: | Peugeot | Ford | Opel |
| Model: | 505 | Scorpio | Manta |
| Generation: | 505 Break (551D) | Scorpio I Turnier (GGE) | Manta B CC |
| Engine / modification: | 2.5 Diesel (70 Hp) | 2.9i 4x4 (145 Hp) | 2.0 (90 Hp) |
| Production start: | 1986 year | 1988 year | 1977 year |
| Production end: | 1993 year | 1993 year | 1980 year |
| Coupe type: | Combi | Hatchback | |
| Num. of Doors: | 5 | 3 | |
| Num. of seats: | 5 | 4 | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | 50 l | |
| Power: | 70 hp | 145 hp | 90 hp |
| Max power in: | 5500 rpm. | 5200 rpm. | |
| Maximum speed: | 172 km/h | ||
| Acceleration from 0 to 100 km/h: | 12 sec | ||
| Torque: | 229 Nm @ 3000 rpm. | 142 Nm @ 3800 rpm. | |
| Engine position: | Front, longitudinal | Front, longitudinal | |
| Engine displacement: | 2933 cm3 | 1979 cm3 | |
| Fuel System: | Multi-point injection | Carburettor | |
| Position of cylinders: | V engine | Inline | |
| Valvetrain: | OHC | SOHC | |
| Number of cylinders: | 6 | 4 | |
| Number of valves per cylinder: | 2 | 2 | |
| Compression ratio: | 8 | ||
| Piston Stroke: | 72 mm | 69.8 mm | |
| Cylinder Bore: | 93 mm | 95 mm | |
| Wheel Drive: | Rear wheel drive | ||
| Number of Gears (automatic transmission): | 4 | ||
| Number of Gears (manual transmission): | 5 | 4 | |
| Length: | 4744 mm | 4376 mm | |
| Width: | 1760 mm | 1670 mm | |
| Height: | 1490 mm | 1340 mm | |
| Wheelbase: | 2761 mm | 2518 mm | |
| Front track: | 1380 mm | ||
| Rear (Back) track: | 1375 mm | ||
| Minimum volume of Luggage (trunk): | 330 l | ||
| Maximum amount of Luggage (trunk): | 670 l | ||
| Max weight: | 1470 kg | ||
| Front brakes: | Ventilated discs | Disc | |
| Rear brakes: | Disc | Drum | |
| Kerb Weight: | 1030 kg | ||
| Steering type: | Steering rack and pinion | ||
| Power steering: | Hydraulic Steering | ||
| Minimum turning circle (turning diameter): | 10.4 m | 10.1 m |