Comparison Peugeot 405 I (15B) 1.9 4x4 (109 Hp) & Volvo S40 II (facelift 2008) 2.5i AWD MT (220 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Peugeot | Volvo |
| Model: | 405 | S40 |
| Generation: | 405 I (15B) | S40 II (facelift 2008) |
| Engine / modification: | 1.9 4x4 (109 Hp) | 2.5i AWD MT (220 Hp) |
| Production start: | 1988 year | 2008 year |
| Production end: | 1992 year | 2010 year |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 4 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 12.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 6.4 l/100 km | |
| Fuel consumption / economy - combined: | 8.7 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 62 l | |
| Emission standard: | EURO IV | |
| Power: | 109 hp | 220 hp |
| Max power in: | 5000 rpm. | |
| Maximum speed: | 240 km/h | |
| Acceleration from 0 to 100 km/h: | 6.8 sec | |
| Torque: | 320 Nm/1500-4800 rpm. | |
| Model Engine: | B5254T3 | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 2521 cm3 | |
| Fuel System: | Mono-point injection | Multi-point injection |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | - | |
| Number of cylinders: | 5 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9 | |
| Piston Stroke: | 93.2 mm | |
| Cylinder Bore: | 83 mm | |
| Wheel Drive: | All wheel drive (4x4) | Front wheel drive |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 4468 mm | |
| Width: | 1770 mm | |
| Height: | 1452 mm | |
| Wheelbase: | 2640 mm | |
| Front track: | 1531 mm | |
| Rear (Back) track: | 1535 mm | |
| Minimum volume of Luggage (trunk): | 404 l | |
| Maximum amount of Luggage (trunk): | 883 l | |
| Front suspension: | McPherson | |
| Rear suspension: | Hydraulic elements | |
| Max weight: | 1960 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1368 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 10.6 m |