Car technical specifications and fuel economy / consumption / mpg

Comparison Peugeot 308 SW II GT 1.6 THP (205 Hp) & BMW 5 Series (E12, Facelift 1976) 528i (177 Hp)


Add car
Peugeot 308 SW II GT 1.6 THP (205 Hp)
Remove car
BMW 5 Series (E12, Facelift 1976) 528i (177 Hp)
Remove car
Brand: Peugeot BMW
Model: 308 5 Series
Generation: 308 SW II 5 Series (E12, Facelift 1976)
Engine / modification: GT 1.6 THP (205 Hp) 528i (177 Hp)
Production start: 2015 year 1977 year
Production end: 1978 year
Coupe type: Combi Sedan
Num. of Doors: 5 4
Num. of seats: 5 5
Fuel consumption / economy - urban: 4.8 l/100 km
Fuel consumption / economy - extra urban: 3.7 l/100 km
Fuel consumption / economy - combined: 4.1 l/100 km 10.6 l/100 km
Fuel Type: Petrol (Gasoline) Petrol (Gasoline)
Fuel tank volume: 53 l 70 l
Emission standard: EURO VI
CO2 emissions: 134 g/km
Power: 205 hp 177 hp
Max power in: 6000 rpm. 5800 rpm.
Maximum speed: 235 km/h 208 km/h
Acceleration from 0 to 100 km/h: 7.6 sec 9.3 sec
Torque: 285 Nm/1750 rpm. 235 Nm @ 4300 rpm.
Model Engine: M30
Engine position: Front, transverse Front, longitudinal
Engine displacement: 1598 cm3 2788 cm3
Engine oil capacity: 5.8 l
Fuel System: Direct injection Multi-point injection
Aspiration / Turbine: Turbocharging
Position of cylinders: Inline Inline
Number of cylinders: 4 6
Number of valves per cylinder: 4 4
Compression ratio: 10.2
Piston Stroke: 84 mm
Cylinder Bore: 84 mm
Wheel Drive: Front wheel drive
Number of Gears (manual transmission): 6 5
Length: 4585 mm 4620 mm
Width: 1863 mm 1690 mm
Height: 1461/1472 mm 1425 mm
Wheelbase: 2730 mm 2636 mm
Front track: 1551/1563 mm 1406 mm
Rear (Back) track: 1546/1557 mm 1442 mm
Ride height(clearance): 109 mm 140 mm
Minimum volume of Luggage (trunk): 610 l 440 l
Maximum amount of Luggage (trunk): 1660 l
Front suspension: Independent, Spring McPherson, with stabilizer
Rear suspension: Semi-independent, spring
Max weight: 1880 kg
Front brakes: Ventilated discs Disc
Rear brakes: Disc Disc
Kerb Weight: 1315 kg 1410 kg
ABS: yes
Steering type: Steering rack and pinion
Minimum turning circle (turning diameter): 11.2 m
Tire size: 225/40 R18 W
Wheel rims size: R18