Comparison Peugeot 208 I (facelift 2015) 1.6 THP (208 Hp) & Hyundai Elantra II Wagon 1.5 12V (88 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Peugeot | Hyundai |
| Model: | 208 | Elantra |
| Generation: | 208 I (facelift 2015) | Elantra II Wagon |
| Engine / modification: | 1.6 THP (208 Hp) | 1.5 12V (88 Hp) |
| Production start: | 2015 year | 1997 year |
| Production end: | 2018 year | 2000 year |
| Coupe type: | Hatchback | Combi |
| Num. of Doors: | 3/5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 7.0 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.5 l/100 km | |
| Fuel consumption / economy - combined: | 5.4 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | |
| Emission standard: | Euro 6 | |
| CO2 emissions: | 125 g/km | |
| Power: | 208 hp | 88 hp |
| Max power in: | 6000 rpm. | |
| Maximum speed: | 230 km/h | |
| Acceleration from 0 to 100 km/h: | 6.5 sec | |
| Torque: | 300 Nm @ 3000 rpm. | |
| Model Engine: | EP6FDTX | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1598 cm3 | |
| Engine oil capacity: | 4.25 l | |
| Fuel System: | Direct injection | |
| Aspiration / Turbine: | Turbocharger | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 3962 mm | |
| Width: | 1829 mm | |
| Width including mirrors: | 2004 mm | |
| Height: | 1460 mm | |
| Wheelbase: | 2538 mm | |
| Front track: | 1475-1470 mm | |
| Rear (Back) track: | 1471-1467 mm | |
| Ride height(clearance): | 123-129 mm | |
| Minimum volume of Luggage (trunk): | 285 l | |
| Maximum amount of Luggage (trunk): | 1076 l | |
| Front suspension: | Independent type McPherson | |
| Rear suspension: | Elastic beam | |
| Max weight: | 1650 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1160 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.4 m | |
| Permitted trailer load with brakes (12%): | 930 kg |