Comparison Perodua Bezza (facelift 2020) 1.0 (68 Hp) & Holden UTE II 5.7 V8 (340 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Perodua | Holden |
| Model: | Bezza | Ute |
| Generation: | Bezza (facelift 2020) | UTE II |
| Engine / modification: | 1.0 (68 Hp) | 5.7 V8 (340 Hp) |
| Production start: | 2020 year | 2003 year |
| Production end: | 2007 year | |
| Coupe type: | Sedan | Pick-up |
| Num. of Doors: | 4 | 2 |
| Num. of seats: | 5 | 2 |
| Fuel consumption / economy - combined: | 4.4 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 36 l | |
| Emission standard: | Euro 4 | |
| Power: | 68 hp | 340 hp |
| Max power in: | 6000 rpm. | 5600 rpm. |
| Torque: | 91 Nm @ 4400 rpm. | 470 Nm/4800 rpm. |
| Model Engine: | 1KR-VE | |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 998 cm3 | 5665 cm3 |
| Engine oil capacity: | 0.0 l | |
| Coolant: | 0.0 l | |
| Fuel System: | Multi-point injection | |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | DOHC, VVT-i | |
| Number of cylinders: | 3 | 8 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 11.5 | |
| Piston Stroke: | 84 mm | |
| Cylinder Bore: | 71 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 5 | 6 |
| Length: | 4170 mm | 5052 mm |
| Width: | 1620 mm | 1844 mm |
| Height: | 1525 mm | 1476 mm |
| Wheelbase: | 2455 mm | 2939 mm |
| Front track: | 1410 mm | |
| Rear (Back) track: | 1405 mm | |
| Minimum volume of Luggage (trunk): | 508 l | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 865 kg | |
| ABS: | yes | yes |
| Minimum turning circle (turning diameter): | 9 m | |
| Tire size: | 175/65 R14 | |
| Wheel rims size: | R14 |