Car technical specifications and fuel economy / consumption / mpg

Comparison Opel Senator A (facelift 1982) 2.3 Comprex D (95 Hp) & Volvo S80 II (facelift 2014) 1.6 T4F (180 Hp) Ethanol


Add car
Opel Senator A (facelift 1982) 2.3 Comprex D (95 Hp)
Remove car
Volvo S80 II (facelift 2014) 1.6 T4F (180 Hp) Ethanol
Remove car
Brand: Opel Volvo
Model: Senator S80
Generation: Senator A (facelift 1982) S80 II (facelift 2014)
Engine / modification: 2.3 Comprex D (95 Hp) 1.6 T4F (180 Hp) Ethanol
Production start: 1985 year 2014 year
Production end: 1986 year
Coupe type: Sedan Sedan
Num. of Doors: 4 4
Num. of seats: 5 4
Fuel consumption / economy - combined: 7.7 l/100 km 6.9/9.3 l/100 km
Fuel Type: Diesel Petrol / Ethanol
Drag coefficient: 0.39
Fuel tank volume: 75 l 70 l
CO2 emissions: 159/153 g/km
Power: 95 hp 180 hp
Max power in: 4200 rpm. 5700 rpm.
Maximum speed: 172 km/h 220 km/h
Acceleration from 0 to 100 km/h: 15 sec 8.5 sec
Torque: 195 Nm @ 2200 rpm. 240 Nm/1620-4980 rpm.
Model Engine: B4164T2
Engine position: Front, transverse
Engine displacement: 2260 cm3 1596 cm3
Fuel System: Diesel - Standard diesel injection (SDI) Direct injection
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler) Turbocharging
Position of cylinders: Inline Inline
Valvetrain: SOHC DOHC
Number of cylinders: 4 4
Number of valves per cylinder: 2 4
Compression ratio: 23 10
Piston Stroke: 85 mm 81.4 mm
Cylinder Bore: 92 mm 79 mm
Wheel Drive: Rear wheel drive Front wheel drive
Number of Gears (manual transmission): 5 6
Length: 4839 mm 4854 mm
Width: 1722 mm 1907 mm
Height: 1415 mm 1493 mm
Wheelbase: 2683 mm 2835 mm
Front track: 1447 mm 1588-1578 mm
Rear (Back) track: 1472 mm 1585-1575 mm
Ride height(clearance): 140 mm 151 mm
Maximum amount of Luggage (trunk): 715 l
Front suspension: Independent, Spring McPherson, with stabilizer
Rear suspension: Independent, spring
Max weight: 2000 kg
Front brakes: Ventilated discs Ventilated discs
Rear brakes: Disc Ventilated discs
Kerb Weight: 1430 kg 1608 kg
ABS: yes
Steering type: Steering rack and pinion
Minimum turning circle (turning diameter): 10.8 m 11.7 m