Comparison Opel Senator A (facelift 1982) 2.0 E (110 Hp) & Chevrolet Camaro I RS 327 V8 Turbo-Fire (275 Hp) Powerglide
Add car |
Remove car |
Remove car |
| Brand: | Opel | Chevrolet |
| Model: | Senator | Camaro |
| Generation: | Senator A (facelift 1982) | Camaro I |
| Engine / modification: | 2.0 E (110 Hp) | RS 327 V8 Turbo-Fire (275 Hp) Powerglide |
| Production start: | 1982 year | 1966 year |
| Production end: | 1984 year | 1969 year |
| Coupe type: | Sedan | Coupe |
| Num. of Doors: | 4 | 2 |
| Num. of seats: | 4 | 4 |
| Fuel consumption / economy - combined: | 9.2 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.39 | 0.47 |
| Fuel tank volume: | 75 l | 68 l |
| Power: | 110 hp | 275 hp |
| Max power in: | 5400 rpm. | 4800 rpm. |
| Maximum speed: | 180 km/h | |
| Acceleration from 0 to 100 km/h: | 13.5 sec | |
| Torque: | 162 Nm @ 3000 rpm. | 481 Nm @ 3200 rpm. |
| Engine displacement: | 1979 cm3 | 5359 cm3 |
| Engine oil capacity: | 3.8 l | |
| Coolant: | 16.1 l | |
| Fuel System: | Multi-point injection | Carburettor |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | SOHC | OHV |
| Number of cylinders: | 4 | 8 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 9.4 | 10 |
| Piston Stroke: | 69.8 mm | 82.55 mm |
| Cylinder Bore: | 95 mm | 101.6 mm |
| Wheel Drive: | Rear wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | 2 | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4839 mm | 4691 mm |
| Width: | 1722 mm | 1842 mm |
| Height: | 1415 mm | 1295 mm |
| Wheelbase: | 2683 mm | 2743 mm |
| Front track: | 1447 mm | 1499 mm |
| Rear (Back) track: | 1472 mm | 1496 mm |
| Ride height(clearance): | 140 mm | 140 mm |
| Front overhang: | 930 mm | |
| Rear overhang: | 1019 mm | |
| Minimum volume of Luggage (trunk): | 235 l | |
| Maximum amount of Luggage (trunk): | 715 l | |
| Max weight: | 1885 kg | |
| Front brakes: | Disc | Drum |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 1335 kg | 1408 kg |
| Minimum turning circle (turning diameter): | 10.8 m | 11.8 m |