Comparison Opel Monza A2 2.2 E (115 Hp) Automatic & Peugeot 301 1.6 VTi (115 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Opel | Peugeot |
| Model: | Monza | 301 |
| Generation: | Monza A2 | 301 |
| Engine / modification: | 2.2 E (115 Hp) Automatic | 1.6 VTi (115 Hp) Automatic |
| Production start: | 1984 year | 2012 year |
| Production end: | 1986 year | 2017 year |
| Coupe type: | Coupe | Sedan |
| Num. of Doors: | 3 | 4 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - urban: | 10 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.6 l/100 km | |
| Fuel consumption / economy - combined: | 7.3 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.36 | |
| Fuel tank volume: | 70 l | 50 l |
| Emission standard: | Euro 5 | |
| Power: | 115 hp | 115 hp |
| Max power in: | 5600 rpm. | 6050 rpm. |
| Maximum speed: | 180 km/h | 188 km/h |
| Acceleration from 0 to 100 km/h: | 15 sec | 11.8 sec |
| Torque: | 160 Nm/4200 rpm. | 150 Nm @ 4000 rpm. |
| Engine position: | Front, transverse | |
| Engine displacement: | 1979 cm3 | 1587 cm3 |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | SOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 9.4 | |
| Piston Stroke: | 69.8 mm | |
| Cylinder Bore: | 95 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (automatic transmission): | 3 | 4 |
| Length: | 4720 mm | 4442 mm |
| Width: | 1722 mm | 1748 mm |
| Height: | 1380 mm | 1466 mm |
| Wheelbase: | 2668 mm | 2652 mm |
| Front track: | 1447 mm | |
| Rear (Back) track: | 1472 mm | |
| Ride height(clearance): | 140 mm | |
| Minimum volume of Luggage (trunk): | 350 l | 506 l |
| Maximum amount of Luggage (trunk): | 746 l | 1332 l |
| Max weight: | 1885 kg | 1559 kg |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1350 kg | 1090 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.8 m |